CO Test Gas

Chemical Resistant Gloves, Nitrile / PVC, Fingers Only, Not Rated, 12 in, Cuff Gauntlet, Lining Cotton/Fleece, Glove Size 9, Color Blue, Unsupported, Standards ANSI, EN 388 3131A, EN 407 X1XXXX, EN 420:2003 + A1:2009, EN ISO 374-1:2016 Type B JKL, EN ISO 374-5:2016, Resists Chemicals, 1 Pair.

Carpet Spot Remover and Cleaner, Container Type Aerosol Spray Can, Fragrance Neutral.

188 in, Color Clear, Dimensional Standards ASME B18.21.

Strut Channel - Slotted, Slot Type Slotted, Size 1 5/8 in x 1 5/8 in, Slot Length 1 1/8 in, Slot Width 9/16 in, Overall Length 2 ft, Overall Height 1 5/8 in, Overall Width 1 5/8 in, Aluminum, Gauge 12 ga, Hole Size 9/16 in x 1 1/8 in, Load Capacity 1,660 lb, Hole Spacing 2 in Center to Center, Style Single, Channel Type Slotted, Slot Spacing 2 in, Thickness 3/32 in, Silver, Finish Plain, FS-200.

5 Percent, Gauge Case Material Polybutylene Terephthalate, Process Connection Type NPT, Process Connection Gender Male, Lens Material Glass, Process Connection Size 1/2 in, Field Fillable No, Process Connection Location Bottom, Case Color Black, IP/NEMA Rating Not Rated, Primary Pressure Range 0 to 15, Dry Dampening Feature None, Vibration Resistance None, Dial Color White, Pressure Gauge Type Process Pressure Gauge.Process Pressure Gauge, Nominal Dial Size 4 1/2 in, Accuracy +/-0.

Trigger Spray Bottle, Dispensing Type Stream, 32 oz, Clear, Sprayer Color Clear, Bottle Material Polyethylene, Sprayer Material Polyethylene, Dip Tube Length 9 7/8 in, Acid Resistant Seal No, Seal Material Polyethylene Foam, Imprinting Crew Restroom Floor and Surface Non-Acid Disinfectant Cleaner, Graduation Markings No, Overall Height 11 3/4 in, Closure Size 28/410, Standards EPA Registered, Closure Diamenter 28 mm, Closure Thread Style 410.

5 in, Overall Length 2.CO Test Gas, Includes Test Gas with Test Port Nozzle and Conventional Spray Nozzle, Product Type CO Test Gas, For Use With SL-701 Series or Open Area CO Detectors, Manufacturer Warranty Length 1 yr, Maximum Operating Temperature 122 Degrees F, Overall Height 6.5 in, Standards UL Listed.

76 oz Gravity Value.25 A, Duty Cycle Continuous, Mounting Holes 1-3/8 x 7/8 in, 1.Solenoid,Laminated,1/8 - 3/4 in,Continus Stroke 1.

5 in, Standards UL Listed.CO Test Gas, Includes Test Gas with Test Port Nozzle and Conventional Spray Nozzle, Product Type CO Test Gas, For Use With SL-701 Series or Open Area CO Detectors, Manufacturer Warranty Length 1 yr, Maximum Operating Temperature 122 Degrees F, Overall Height 6.

25 A, Duty Cycle Continuous, Mounting Holes 1-3/8 x 7/8 in, 1.76 oz Gravity Value.Solenoid,Laminated,1/8 - 3/4 in,Continus Stroke 1.