Tapered Roller Bearing Cone

About The 187 in, Lubricant Material Not Applicable, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outside Diameter 9.562 in, For Cup Width 1.41 in, Ring Material Carbon Steel, Roller Material Carbon Steel, System of Measurement Inch, Dynamic Load Capacity 67,000 lbf

Tapered Roller Bearing Cone, Bearing Industry Number LM739749, Bore Diameter 7 3/4 in, Bore Type Cylindrical, Cage Material Steel, Compatible Cup Manufacturer Part Number LM739710, Cone Width 1.562 in, For Cup Width 1.187 in, Lubricant Material Not Applicable, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outside Diameter 9.41 in, Ring Material Carbon Steel, Roller Material Carbon Steel, System of Measurement Inch, Dynamic Load Capacity 67,000 lbf

Bearings,V-belts & Power Transmission Equipment,Roller Bearings,Tapered Roller Bearings

Disc Bearing,2.7559 In. Bore

Tube Nut,O.L 15 1/2 mm,Thread M18 x 1.5

Bearings,V-belts & Power Transmission Equipment,Roller Bearings,Tapered Roller Bearings

Specifications of Tapered Roller Bearing Cone
Category
Instock	instock

Last Updated June 21st, 2024 12:27 am

More Varieties

Rating :- 8.17 /10

Votes :- 28

Motor,2HP,3450rpm,56HC,60Hz,208-230/440V

Motor,2HP,3450rpm,56HC,60Hz,208-230/440V.

Motors,General Purpose AC Motors,3-Phase AC Motors

U.S. MOTORS

Calibration gas, Carbon Monoxide, Hydrogen Sulfide, Methane, Nitrogen, Oxygen, 34 L, +/-5% Accuracy

5 Percent, Oxygen 18 Percent, Gas Type Carbon Monoxide, Hydrogen Sulfide, Methane, Oxygen, Product Type Calibration Gas, Chemical Formula CH4, CO, H2S, O2, CAS Number 630-08-0, 74-82-8, 7782-44-7, 7783-06-4, Accuracy +/-5 Percent.64 in, For Use With All OEM Gas Detectors, Gas Mixture Carbon Monoxide 100 ppm, Hydrogen Sulfide 25 ppm, Methane (10 Percent LEL) 0.Calibration Gas, CGA Number Not Applicable, Container Type Cylinder, Cylinder Capacity 34 L, Cylinder Diameter 3.13 in, Cylinder Height 10.

Facility & Worksite Safety,Gas Detection,Calibration Gas

GASCO

Calibration gas, Carbon Monoxide, Hydrogen Sulfide, Nitrogen, Oxygen, Pentane, 74 L, +/-5% Accuracy

35 Percent, Gas Type Carbon Monoxide, Hydrogen Sulfide, Nitrogen, Oxygen, Pentane, Product Type Calibration Gas, Chemical Formula C5H12, CO, H2S, N2, O2, CAS Number 109-66-0, 630-08-0, 7727-37-9, 7782-44-7, 7783-06-4.25 in, Cylinder Height 14.Calibration Gas, CGA Number Not Applicable, Container Type Cylinder, Cylinder Capacity 74 L, Cylinder Diameter 4.

Facility & Worksite Safety,Gas Detection,Calibration Gas

GASCO