reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Plastics,Plastic Sheets
PROFESSIONAL PLASTICS

Black ABS Sheet - Machine Grade - Molded,2.500 Thick,12 X 24

About The Engineering Grade ABS is available in Rods & Sheets to customer specifications: ABS Rods are produced up to 6" diameter in standard 8 foot lengths (Prices Listed Per Foot). For heat-bending and thermoformed parts, use ABS Forming Grade. It has good chemical & stress-resistance, as well as, a combination of toughness with rigidity & creep resistance

ABS Sheets / Plates are available in two types - Compression-Molded or Extruded: Compression Molded Sheets are available up to 4" thick in 48" x 96" Standard Thickness Tolerance of Compression-Molded Sheets is +/-10%. Engineering Grade ABS is available in Rods & Sheets to customer specifications: ABS Rods are produced up to 6" diameter in standard 8 foot lengths (Prices Listed Per Foot). Machine Grade ABS is easily machined via standard machining techniques including; turning, drilling, milling, and sawing. - Note: Extruded Sheets have a better thickness tolerance than molded sheets. Extruded Sheets are produced up to 24" x 48", and are sold upon special request only. It has good chemical & stress-resistance, as well as, a combination of toughness with rigidity & creep resistance. For heat-bending and thermoformed parts, use ABS Forming Grade. ABS Sheets & Rods - Machine Grade ABS Sheets & Rods. - PLUS ONLY Compression-Molded Sheets are available upon request at an additional cost. (also more expensive) ABS has perhaps the best balance of properties when cost is a factor.

Plastics,Plastic Sheets

Black ABS Sheet - Machine Grade - Molded,2.500 Thick,12 X 24

Plastics,Plastic Sheets

Specifications of Black ABS Sheet - Machine Grade - Molded,2.500 Thick,12 X 24

Category
Instockinstock

Last Updated

Black ABS Sheet - Machine Grade - Molded,2.500 Thick,12 X 24
More Varieties

Rating :- 9.86 /10
Votes :- 27
Yoke Type Track Rollersdouble, 3058032RS

Yoke Type Track Rollersdouble, 3058032RS

CONSOLIDATED BEARINGS 305803-2RS Yoke Type Track Rollersdouble, 3058032RS.

  • Bearings,V-belts & Power Transmission Equipment,Linear Bearings & Guides,Cam Followers & Track Rollers
  • CONSOLIDATED BEARINGS
    • Single Pitch Roller Chain Sprockets, 12B40

    Single Pitch Roller Chain Sprockets, 12B40

    TSUBAKI 12B40 Single Pitch Roller Chain Sprockets, 12B40.

  • Bearings,V-belts & Power Transmission Equipment,Chains & Chain Sprockets,Chain Sprockets
  • TSUBAKI
    • Deep Groove Ball Bearing, 6020ZZ P6 C3

    Deep Groove Ball Bearing, 6020ZZ P6 C3

    CONSOLIDATED BEARINGS 6020-ZZ P/6 C/3 Deep Groove Ball Bearing, 6020ZZ P6 C3.

  • Bearings,V-belts & Power Transmission Equipment,Ball Bearings,Radial Ball Bearings
  • CONSOLIDATED BEARINGS
    • G-10/FR-4 is a thermosetting industrial laminate consisting of a continuous filament glass cloth material with an epoxy resin binder.

    G-10/FR-4 is a thermosetting industrial laminate consisting of a continuous filament glass cloth material with an epoxy resin binder.

    G-10/FR-4 glass epoxy laminate meets the specifications of Mil-I-24768/27 G-10 & FR-4 also meet LP 509 & MIL P 18177 Type GEE Maximum Continuous Operating Temperature: 285°F Commonly referred to as Micarta, Bakelite and more.Natural FR-4 Sheet,0.

  • Plastics,Plastic Sheets
  • PROFESSIONAL PLASTICS
    • A better insulator than glass, PC sheet contributes to lower energy costs.

    A better insulator than glass, PC sheet contributes to lower energy costs.

    This uncoated polycarbonate sheet is the standard grade for general purpose applications and can be used for economical protection against breakage or intrusion.080" to .

  • Plastics,Plastic Sheets
  • PROFESSIONAL PLASTICS
    • Delrin Rods are Produced in Standard 8 Foot Lengths.

    Delrin Rods are Produced in Standard 8 Foot Lengths.

    Natural Delrin Homopolymer Sheet,0.

  • Plastics,Plastic Sheets
  • PROFESSIONAL PLASTICS
    • Clear Plexiglass Sheet,0.187 Thick,11 X 14

    Clear Plexiglass Sheet,0.187 Thick,11 X 14

    Clear Plexiglass Acrylic Sheets - clarity, strength, lightweight - Cut-To-Size and Standard Sizes.

  • Plastics,Plastic Sheets
  • PROFESSIONAL PLASTICS
    • Machine Grade ABS is easily machined via standard machining techniques including; turning, drilling, milling, and sawing.

    Machine Grade ABS is easily machined via standard machining techniques including; turning, drilling, milling, and sawing.

    (also more expensive).It has good chemical & stress-resistance, as well as, a combination of toughness with rigidity & creep resistance.500 Thick,12 X 24 ABS has perhaps the best balance of properties when cost is a factor. ABS Sheets & Rods - Machine Grade ABS Sheets & Rods.

  • Plastics,Plastic Sheets
  • PROFESSIONAL PLASTICS
    • Clear Plexiglass Sheet,0.187 Thick,11 X 14

    Clear Plexiglass Sheet,0.187 Thick,11 X 14

    Clear Plexiglass Acrylic Sheets - clarity, strength, lightweight - Cut-To-Size and Standard Sizes.

  • Plastics,Plastic Sheets
  • PROFESSIONAL PLASTICS
    • Machine Grade ABS is easily machined via standard machining techniques including; turning, drilling, milling, and sawing.

    Machine Grade ABS is easily machined via standard machining techniques including; turning, drilling, milling, and sawing.

    For heat-bending and thermoformed parts, use ABS Forming Grade. - PLUS ONLY Compression-Molded Sheets are available upon request at an additional cost. - Note: Extruded Sheets have a better thickness tolerance than molded sheets.500 Thick,12 X 24 ABS has perhaps the best balance of properties when cost is a factor.

  • Plastics,Plastic Sheets
  • PROFESSIONAL PLASTICS