reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Magnets,Rare Earth Magnets
J.W. WINCO

GN50.2-SC-10-M3 Retaining Magnet

About The 2 retaining magnets are a shielded magnetic system..GN 50

GN 50.2 retaining magnets are a shielded magnetic system.

Magnets,Rare Earth Magnets

GN50.2-SC-10-M3 Retaining Magnet

Magnets,Rare Earth Magnets

Specifications of GN50.2-SC-10-M3 Retaining Magnet

Category
Instockinstock

Last Updated

GN50.2-SC-10-M3 Retaining Magnet
More Varieties

Rating :- 8.17 /10
Votes :- 33
GN 356.3 vibration isolation mounts are suitable for the anti-vibration mounting of machine units such as compressors and pumps.

GN 356.3 vibration isolation mounts are suitable for the anti-vibration mounting of machine units such as compressors and pumps.

The hourglass shape absorbs side forces better compared with cylindrical vibration isolation mounts.3-25-20-20-1/4-55 Rubber Bumper They feature 2 tapped holes for mounting.JW Winco GN356..

  • Workholding & Machine Tool Accessories,Mounts and Vibration Control,Cylindrical Vibration Isolators
  • J.W. WINCO
    • Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw.

    Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw.

    GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction.

  • Workholding & Machine Tool Accessories,Fixture Clamps
  • J.W. WINCO
    • GN 75 waist shaped knobs are widely used on push / pull type applications.

    GN 75 waist shaped knobs are widely used on push / pull type applications.

    .GN75-16-M6-E Waist Shaped Knob, Steel The smooth shape gives the operator a comfortable grip.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO
    • GN 516 compression latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm into a 6 mm linear stroke.

    GN 516 compression latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm into a 6 mm linear stroke.

    .JW Winco GN 516-VK7-55 Cam Latch This cam latch housing is designed for common applications such as making a tight and vibration-proof interlock in the end position (clamping position) in connection with an elastic sealing.

  • Door Hardware & Components,Door Latches,Cam Latches
  • J.W. WINCO
    • GN 817.4 indexing plungers are similar to GN 817, but with a T-handle instead of a round head knob.

    GN 817.4 indexing plungers are similar to GN 817, but with a T-handle instead of a round head knob.

    5-C Indexing Plunger This shape allows better visual orientation of the indexing position and is advantageous when greater unlocking forces occur.

  • Workholding & Machine Tool Accessories,Spring Plungers
  • J.W. WINCO
    • JW Winco GN323 12MF12/A Disc Handwheel

    JW Winco GN323 12MF12/A Disc Handwheel

    .GN 323 solid disk handwheels feature a slight textured finish that provides an even finish all over.

  • Door Hardware & Components,Door Latches,Cam Latches
  • J.W. WINCO
    • Once the opening pressure given in the table is exceeded, GN 881 breather valves with gasket will vent into a container, preventing excessive internal container pressure.

    Once the opening pressure given in the table is exceeded, GN 881 breather valves with gasket will vent into a container, preventing excessive internal container pressure.

    .GN881-G1/2-200-MS-M Breather Valve Brass Brass In its normal state, the gasket seals the container and prevents dirt and dust from getting inside of it.

  • Hydraulic Cylinders & Equipment,Hydraulic Filtration,Breathers
  • J.W. WINCO
    • GN50.2-SC-10-M3 Retaining Magnet

    GN50.2-SC-10-M3 Retaining Magnet

    2 retaining magnets are a shielded magnetic system.

  • Magnets,Rare Earth Magnets
  • J.W. WINCO
    • Once the opening pressure given in the table is exceeded, GN 881 breather valves with gasket will vent into a container, preventing excessive internal container pressure.

    Once the opening pressure given in the table is exceeded, GN 881 breather valves with gasket will vent into a container, preventing excessive internal container pressure.

    .GN881-G1/2-200-MS-M Breather Valve Brass Brass In its normal state, the gasket seals the container and prevents dirt and dust from getting inside of it.

  • Hydraulic Cylinders & Equipment,Hydraulic Filtration,Breathers
  • J.W. WINCO
    • GN50.2-SC-10-M3 Retaining Magnet

    GN50.2-SC-10-M3 Retaining Magnet

    2 retaining magnets are a shielded magnetic system.GN 50..

  • Magnets,Rare Earth Magnets
  • J.W. WINCO