reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
J.W. WINCO

GN20-100-M20-235-A Hygienic Leveling Feet

About The GN 20 levelling feet without mounting holes are certified according to 3-A Sanitary Standard Inc. The bottom seal protects the area beneath the foot plate from dirt. For this, the foot must be pressed down by the weight of the machine

GN 20 levelling feet without mounting holes are certified according to 3-A Sanitary Standard Inc. The high quality finish prevents adherence of dirt and facilitates cleaning. The bottom seal protects the area beneath the foot plate from dirt. For this, the foot must be pressed down by the weight of the machine. guidelines and are intended for use in hygiene areas. Due to the wiper or the ball seal, the moving components are sealed against the environment. The sealing ring above the adjustment sleeve enables fastening without dead space.

Hardware Supplies,Leveling Feet & Pads,Leveling Mounts

GN20-100-M20-235-A Hygienic Leveling Feet

Hardware Supplies,Leveling Feet & Pads,Leveling Mounts

Specifications of GN20-100-M20-235-A Hygienic Leveling Feet

Category
Instockinstock

Last Updated

GN20-100-M20-235-A Hygienic Leveling Feet
More Varieties

Rating :- 8.07 /10
Votes :- 32
Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

625-BN Socket Set Screw/ This allows full clamping of the flat faced ball at all times. Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees. The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces. GN605-10X24-.

  • Screws & Bolts,Set Screws
  • J.W. WINCO
    • The clamping bores of GN 134 two-way connector clamps are machined and designed for construction tubings.

    The clamping bores of GN 134 two-way connector clamps are machined and designed for construction tubings.

    Bores and square bores of the same nominal size can be assembled in any combination..

  • Workholding & Machine Tool Accessories,Fixture Clamps
  • J.W. WINCO
    • GN 351 vibration isolation mounts, also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers, are suitable for the elastic mounting of machine units such as motors, compressors and pumps.

    GN 351 vibration isolation mounts, also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers, are suitable for the elastic mounting of machine units such as motors, compressors and pumps.

    .GN351-25-20-M6-EE-55 Rubber Bumper Internal Threads These rubber mounts are simple and economical construction elements. Their resilience and their broad range of different sizes and dimensions allow these mounts to be used in many applications that require vibration isolation.

  • Workholding & Machine Tool Accessories,Mounts and Vibration Control,Vibration Isolator Pads
  • J.W. WINCO
    • GN 41 leveling feet are simple, economically priced components.

    GN 41 leveling feet are simple, economically priced components.

    The static load rating of these feet is limited due to the acceptable load rating of the stud.GN41-80-M20-75-D0-UK Leveling Feet The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The values given in the table assume a straight compressive load, perpendicular to the foot..

  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO
    • GN 41 leveling feet are simple, economically priced components.

    GN 41 leveling feet are simple, economically priced components.

    .GN41-80-M20-75-D0-UK Leveling Feet The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The values given in the table assume a straight compressive load, perpendicular to the foot.

  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO