reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Workholding & Machine Tool Accessories,Fixture Clamps
J.W. WINCO

GN477-B8-MT Mounting Block

About The The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.. The bore spacing m of GN 477 connector mini-clamps corresponds to two-way base connector mini-clamps and flange bolts

In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws. The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements. The bore spacing m of GN 477 connector mini-clamps corresponds to two-way base connector mini-clamps and flange bolts.

Workholding & Machine Tool Accessories,Fixture Clamps

GN477-B8-MT Mounting Block

Workholding & Machine Tool Accessories,Fixture Clamps

Specifications of GN477-B8-MT Mounting Block

Category
Instockinstock

Last Updated

GN477-B8-MT Mounting Block
More Varieties

Rating :- 8.21 /10
Votes :- 28
GN 728 economical cabinet "U" handles are a low-cost alternative in metal.

GN 728 economical cabinet "U" handles are a low-cost alternative in metal.

Hole center dimension is identical in both versions, so they can be mounted in pairs opposite each other.5-120-B-BL Cabinet U-Handle The installation can be carried out from the back (type A) as well as from the operator’s side (type B).GN728-22..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • DIN 99 fixed clamping levers are machined from solid bar.

    DIN 99 fixed clamping levers are machined from solid bar.

    DIN99-50-M6-M Clamping Lever, Straight Ideal for applications that require higher levels of torque.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    JW Winco GN115-SK-8 Cam Latch The beveled edges of the latch arm create a smooth latching of the door..

  • Door Hardware & Components,Door Latches,Cam Latches
  • J.W. WINCO
    • Made in the USA, WN 300.1 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay.

    Made in the USA, WN 300.1 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay.

    WN300.1-78-M10-50 Plastic Adjustable Lever All such levers have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • GN 516 compression latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm into a 6 mm linear stroke.

    GN 516 compression latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm into a 6 mm linear stroke.

    .JW Winco GN 516-RG-26 Cam Latch This cam latch housing is designed for common applications such as making a tight and vibration-proof interlock in the end position (clamping position) in connection with an elastic sealing.

  • Door Hardware & Components,Door Latches,Cam Latches
  • J.W. WINCO
    • With the GN 125 flat adjustable tension levers, the overall height is reduced to a minimum.

    With the GN 125 flat adjustable tension levers, the overall height is reduced to a minimum.

    JW Winco GN125 8NA33/E Adjustable Lever The cover disk gives these levers a nice appearance. They are ideal wherever parts have to be clamped in a confined space or in a particular lever position.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

    Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

    Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees. GN605-M16-25-VRN Socket Set Screw This allows full clamping of the flat faced ball at all times..

  • Screws & Bolts,Set Screws
  • J.W. WINCO
    • The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.

    The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.

    In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws.

  • Workholding & Machine Tool Accessories,Fixture Clamps
  • J.W. WINCO
    • Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

    Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

    The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces. Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees..GN 605 socket set screws with full ball point (type A) are used in applications where a ball point contact is required.

  • Screws & Bolts,Set Screws
  • J.W. WINCO
    • The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.

    The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.

    GN477-B8-MT Mounting Block The bore spacing m of GN 477 connector mini-clamps corresponds to two-way base connector mini-clamps and flange bolts. In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws..

  • Workholding & Machine Tool Accessories,Fixture Clamps
  • J.W. WINCO