Gray PVC Type 1 Tube Stock 6 Ft L

Threaded Pipe Flange, Flat Face, 1/2 in Steam Pressure, 0 Degrees to 270 Degrees F, Number of Bolt Holes 4, 1/2 in Bolt Hole Diameter.

Tubing, Application Beverages, Food, Water, Color Clear, Hardness Shore D 45, Inside Diameter 1/8 in, Jacket Color No Jacket, Jacket Material No Jacket, Material Polyethylene, Material Trade Name Not Applicable, Material Trade Number Not Applicable, Maximum Operating Pressure 340 psi, Maximum Operating Temperature 140 Degrees F, Outside Diameter 3/8 in, Overall Length 50 ft, Peristaltic Pump Compatible No, PEX Type Not Applicable, Resistance Properties Chemical Resistant.

000 in, Overall Width 12 in, Tensile Strength 700 psi, Texture Smooth, Overall Thickness 0.Silicone Sheet, Sheet, Adhesive Type Plain Backing, Backing Type Non-Adhesive, Color Red, Durometer 40A, Grade Food, Material Silicone, Standards ASTM D2000 GE 407, FDA 21 CFR 177.

Polyethylene Sheet, Material Polyethylene, Shape Sheet, Grade Standard, Length 4 ft, Width 24 in, Thickness 1/2 in, Backing Type Adhesive, Cell Type Closed Cell, Adhesive Type Acrylic, Number of Adhesive Sides 1, Color Black, Density 4 lb/cu ft, Maximum Temperature 225 Degrees F, Minimum Temperature -40 Degrees F, Maximum Adhesive Temperature 230 Degrees F, Minimum Adhesive Temperature -30 Degrees F, Tensile Strength 85 psi, Texture Smooth, Firmness @ 25 Percent Deflection 14 psi.

Sheet Stock, ePTFE, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.

05 in, Leg Length 1 1/2 in x 1 1/2 in, Clear, 90 Degrees , Plastic Clarity Clear, Tensile Strength Rating Good, Impact Strength Rating Excellent, Minimum Temperature -40 Degrees F, Maximum Temperature 240 Degrees F, Plastic Hardness Rating Hard, UV Resistant No, Friction Rating Not Slippery, Water Absorption Rating Good, Machinability Fair, Wear Factor Fair, Corrosion and Chemical Resistance Fair.Angle Stock, Polycarbonate, Standard, Plastic Length 2 ft, Plastic Thickness 0.

2 Percent, Plastic Density 0.Tube Stock, PVC Type 1, Grade Standard, Gray, Plastic Clarity Opaque, Shape Rectangular Tubes, Impact Strength 1.0 ft-lb/in, Friction Coefficient 0.

Lined Wrapped Plain Sleeve Bearing.

2 Percent, Plastic Density 0.

Lined Wrapped Plain Sleeve Bearing.