PM2 TAN 72MMX54.8M IPG-IPG 16

About The Pressure Sensitive Paper Tape, Number of Adhesive Sides 1, Tape Backing Material Kraft Paper, Tape Adhesive Rubber, Tape Thickness 6.0 mil, Tape Width 72 mm, Tape Length 54 4/5 m, Tape Shape Continuous Roll, Tape Color Tan, Clean Removal Time Not Rated, Min. Tape Performance Temp

Pressure Sensitive Paper Tape, Number of Adhesive Sides 1, Tape Backing Material Kraft Paper, Tape Adhesive Rubber, Tape Thickness 6.0 mil, Tape Width 72 mm, Tape Length 54 4/5 m, Tape Shape Continuous Roll, Tape Color Tan, Clean Removal Time Not Rated, Min. Tape Performance Temp. 40 Degrees F, Max. 225 Degrees F, Tape Tensile Strength 34 lb-in, Tape Adhesive Strength 57 oz/in, Tape Core Diameter 3 in, Series PM2 Tape Performance Temp.

Tapes,Masking Tapes

Drill, Pistol Body Style - Air Tools, Free Speed 1,500 RPM, Torque 86.4 in-lb, Average CFM @ 15 Second Run Time 4.00, CFM @ Full Load 16.0, Required Pressure 90 psi, Min.

Paper Based Curby Fill

Tapes,Masking Tapes

Specifications of PM2 TAN 72MMX54.8M IPG-IPG 16
Category
Instock	instock

Last Updated June 10th, 2024 09:59 pm

More Varieties

Rating :- 8.27 /10

Votes :- 29

Tapcon Masonry Screw, 1/4 Dia., Hex, 3 1/4 in L, 410 Stainless Steel Silver Climashield, 100 PK

31 in, Head Diameter Not Applicable, Drive Type External Hex, Material Stainless Steel, Finish Silver Climashield, Material Grade/Class 410, Removable Removable, Compatible Material Block, Brick, Concrete, Drill Bit Size 3/16 in, Screw Anchor Type Concrete Screw Anchor, System of Measurement Inch, Maximum Material Thickness 2 1/4 in, Maximum Ultimate Shear Strength 1,440 lb.Concrete Anchor Screw, Anchor Diameter 1/4 in, Overall Length 3 1/4 in, Head Type Hex, Head Width 0.

Anchors,Anchor Screws,Concrete Anchor Screws

RED HEAD

Outlet Box, Washing Machine, Inlet Connection 1/2 In.

, Box Height 8. MIP, Material of Construction Galvanized Metal, Duplex Receptacle 20 Amp, 110 Volt, Standards UPC, Includes Threaded Drain Fitting, Locknut, 2 Valves, O-Ring, Duplex Receptacle.

Pipes,Valves & Fittings,Supply Lines,Supply Valve Outlet Boxes

GUY GRAY

Ball Valve, Body Material 316 Stainless Steel, Body Style 3-Way, 2-Piece, Pipe Size 1 in, Connection Type FNPT x FNPT x FNPT, Standard Port, Max.

1" FNPT Stainless Steel Ball Valve Inline Range -20 Degrees to 450 Degrees F, Ball Material 316 Stainless Steel, Seat Material RPTFE, Stem Type Blowout Proof, Handle Type Locking Lever, Handle Material 304 Stainless Steel, Stem Material Stainless Steel, Body Seal Material RPTFE Pressure 1,000 psi CWP, Max. Steam Pressure 150 psi WSP, Temp.

Pipes,Valves & Fittings,Valves,Ball Valves

ZORO SELECT