reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Conveyors,Roller Conveying
ULTIMATION

Roller Conveyor With Covers, 24inW X 5L, 1.5in Dia. Rollers

About The The rollers sit approximately 1/4in higher than the frame, allowing the load to protrude over the sides or ends as required. Use these short sections of 5 long conveyors to provide rolling support surfaces either individually or in pairs side by side. This conveyor has a maximum load capacity of 360-pounds when the frame is fully supported

This conveyor has a maximum load capacity of 360-pounds when the frame is fully supported. Use these short sections of 5 long conveyors to provide rolling support surfaces either individually or in pairs side by side. This gravity conveyor is engineered with a 24in overall width from outside of the frame to the outside of the opposite frame, 22in between frame width the distance inside the frames from one side to the other, and 5' overall length. Equipped with a 12 Ga. These gravity roller conveyors include the conveyor frames and rollers. Legs if required are sold separately. steel frame measuring 2-1/2in deep x 1in flange, powder-coated in Ultimation Blue, and 1.5in diameter rollers with polyurethane covers measuring 0.062in thick on 6in roller centers. These conveyors are excellent for both permanent and temporary conveyor lines often found in warehouses, shipping departments and assembly areas. The rollers sit approximately 1/4in higher than the frame, allowing the load to protrude over the sides or ends as required. Gravity curves and spur options can add to the versatility of straight conveyors.

Conveyors,Roller Conveying

Roller Conveyor With Covers, 24inW X 5L, 1.5in Dia. Rollers

Conveyors,Roller Conveying

Specifications of Roller Conveyor With Covers, 24inW X 5L, 1.5in Dia. Rollers

Category
Instockinstock

Last Updated

Roller Conveyor With Covers, 24inW X 5L, 1.5in Dia. Rollers
More Varieties

Roller Conveyor With Covers, 24inW X 5L, 1.5in Dia. Rollers
Rating :- 9.8 /10
Votes :- 29
Unsupported Nitrile Green 13 Gauntlet 15mil Flock Lined, Size L (9)

Unsupported Nitrile Green 13 Gauntlet 15mil Flock Lined, Size L (9)

Chemical Resistant Gloves,PR, Palm, 15 mil, 13 in, Glove Size L, Color Green, Supported, Standards EN 374-1, EN 374-5, EN 388, 1 Pair.

  • Personal Protective Equipment (PPE),Gloves & Hand Protection,Chemical Resistant Gloves
  • BDG
    • 15G Nylon Nitrile Foam Coated Palm Dipped, Size M (8)

    15G Nylon Nitrile Foam Coated Palm Dipped, Size M (8)

    Coated Gloves, Glove Style Knit, Knit Material Nylon, ANSI/ISEA Abrasion Level Not Rated, Hand Protection Style Glove, Additional Hazard Protection None, Base Coating Material Foam Nitrile, Glove Coating Cover Palm, Glove Hand Style Left and Right, Double-Dipped No, Coating Type Dipped, Glove Performance High Dexterity, 1 Pair.

  • Personal Protective Equipment (PPE),Gloves & Hand Protection,Coated Gloves
  • BDG
    • 3 Pigtail Panel Holding Clips, 12 pk.

    3 Pigtail Panel Holding Clips, 12 pk.

    Air Filter Holding Clip, Clip Style Pigtail, For Use With 1 in and 2 in Filter, Number of Clips Required 4, Actual Length 3 in, Clip Wire Gauge 18 ga, Material Galvanized Steel, Package Quantity 12.

  • Filters,Filter Frames,Clips & Gaskets
  • AIR HANDLER
    • Synthetic Pocket Air Filter, 12x24x12, MERV 13

    Synthetic Pocket Air Filter, 12x24x12, MERV 13

    0 micron.Pocket Air Filter, Style - Air Filters Bag, Nominal Filter Size 24x12x12, Performance Rating MERV 13, Filter Efficiency - Air Filters 80 Percent to 85 Percent, Media Color Pink, Media Material Synthetic, Number of Pockets 4, Media Area 19 sq ft, Air Filter Header Type Single Header, Filters Out Cooking Oil, Copier Toner, Droplet Nuclei (Sneeze), Insecticide Dust, MERV 13-16 All Bacteria, Most Face Power, Most Smoke, Most Tobacco Smoke, Paint Pigments, Removes Particles Down To 0.

  • Filters,Pocket Air Filters
  • AIR HANDLER
    • Fiberglass Pocket Air Filter, 24x24x15, MERV 14

    Fiberglass Pocket Air Filter, 24x24x15, MERV 14

    Pocket Air Filter, Style - Air Filters Bag, Nominal Filter Size 24x24x15, Performance Rating MERV 14, Filter Efficiency - Air Filters 90 Percent to 95 Percent, Media Color Yellow, Media Material Fiberglass, Number of Pockets 6, Media Area 30 sq ft, Air Filter Header Type Single Header, Filters Out Cooking Oil, Copier Toner, Droplet Nuclei (Sneeze), Insecticide Dust, MERV 13-16 All Bacteria, Most Face Power, Most Smoke, Most Tobacco Smoke, Paint Pigments.

  • Filters,Pocket Air Filters
  • AIR HANDLER
    • Spike Nail Drive Anchor, 3/8 Dia., 2 L, Steel Zinc Plated, 25 PK

    Spike Nail Drive Anchor, 3/8 Dia., 2 L, Steel Zinc Plated, 25 PK

    75 in, Drill Bit Size 3/8 in, Minimum Installation Depth 1 3/4 in, Drive Pin Anchor Type Vibration-Resistant Drive Anchors, Compatible Material Block, Concrete, Stone, Material Grade/Class 1038, Removable Permanent, System of Measurement Inch, Manufacturer Location Globally Sourced, Material Quality Standards ASTM E488.Pre-Expanded Anchor, Anchor Diameter 3/8 in, Overall Length 2 in, Anchor Material Steel, Finish Zinc Plated, Head Type Round, Head Height 0.21875 in, Head Diameter 0.

  • Anchors,Concrete Anchors,Drive Pin Anchors
  • DEWALT
    • Wipers Set

    Wipers Set

    Wiper Blade Set.

  • Machining,Machine Tool Parts,Skimmer Parts
  • ABANAKI
    • These gravity roller conveyors include the conveyor frames and rollers.

    These gravity roller conveyors include the conveyor frames and rollers.

    This gravity conveyor is engineered with a 24in overall width from outside of the frame to the outside of the opposite frame, 22in between frame width the distance inside the frames from one side to the other, and 5' overall length. steel frame measuring 2-1/2in deep x 1in flange, powder-coated in Ultimation Blue, and 1.5in Dia.

  • Conveyors,Roller Conveying
  • ULTIMATION
    • Wipers Set

    Wipers Set

    Wiper Blade Set.

  • Machining,Machine Tool Parts,Skimmer Parts
  • ABANAKI
    • These gravity roller conveyors include the conveyor frames and rollers.

    These gravity roller conveyors include the conveyor frames and rollers.

    This gravity conveyor is engineered with a 24in overall width from outside of the frame to the outside of the opposite frame, 22in between frame width the distance inside the frames from one side to the other, and 5' overall length.

  • Conveyors,Roller Conveying
  • ULTIMATION