Carbide Bur,Cylinder,1/8 In.

Shunt Trip Relay, Voltage 480V AC, 480V, 60Hz, Amps Not Applicable, 60 Hz, Not Specified Phase, Not Specified, Thread Size Not Applicable, Tube Size Not Applicable, For Use With Condor MDR3 Series Pressure Switches.

Tubing, Application Air, Water, Color Yellow, Food Application Beverage, Hardness Shore a 90 to 95, Inside Diameter 1/4 in, Jacket Color No Jacket, Jacket Material N, Material Polyurethane, Material Trade Name Not Applicable, Maximum Operating Pressure 170 psi @ 180 Degrees F, Maximum Operating Temperature 180 Degrees F, Outside Diameter 3/8 in, Overall Length 100 ft, Resistance Properties Abrasion Resistant, Kink Resistant, Tear Resistant, Wear Resistant, Reinforcement Not Reinforced.

Tubing, Application Air, Chemicals, Hydraulic Fluid, Lubricants, Pesticides, Water, Color Beige, Hardness Shore D 62, Inside Diameter 4 mm, Jacket Color No Jacket, Jacket Material N, Material Nylon, Material Trade Name Not Applicable, Maximum Operating Pressure 341 psi @ 200 Degrees F, Maximum Operating Temperature 200 Degrees F, Outside Diameter 6 mm, Overall Length 100 ft, Resistance Properties Abrasion Resistant, Chemical Resistant, Reinforcement Not Reinforced, Wall Thickness 1 mm.

Hospitality HDTV, Diagonal Screen Size 24 in, Overall Height 13 1/2 in, Screen Refresh Rate 60 Hz, Display Type LED, Maximum Screen Resolution 1366 x 768, Overall Depth 2 1/8 in, Overall Width 21 3/4 in, Weight 7.7 lb, Brightness 200 nit, VESA Pattern 75x75, Facility Type Hospitality, Resolution 720p, Input Type Composite, HDMI, Coaxial Cable Input, Audio Output Type Headphone, Contrast Ratio 3,000:1, Cord Length 70 7/8 in, Includes AV In Adaptor Cable, Power Cord, Includes Remote Control Yes.

Jobber Length Drill Bit, Drill Bit Size 23/64 in, Drill Bit Point Angle 140 Degrees , Carbide, EgiAs, Decimal Equivalent 0.3594, Fractional Inch, Drill Bit Point Type X Thinning Point, Coolant Through, Number of Coolant Holes 2.

, Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.Corner Radius End Mill, 3/4 in Milling Dia.09 in, 1 1/2 in, 4 in.

Spiral Point Tap, Thread Size 5/16 In.-18, UNC, Overall Length 2 27/32 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 13/16 in, 75 Percent Thread Drill Size F, Thread Limit H5, Class of Fit H3, Number of Flutes 2.

1/4 in, Head Dia. 1/8 in, Length of Cut 1/2 in, Overall Length 2 in, Trade Number SA-11.Carbide Bur,Cylinder,1/8 in.

-18, UNC, Overall Length 2 27/32 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 13/16 in, 75 Percent Thread Drill Size F, Thread Limit H5, Class of Fit H3, Number of Flutes 2.Spiral Point Tap, Thread Size 5/16 In.

1/4 in, Head Dia.Carbide Bur,Cylinder,1/8 in.