reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Flow Measuring Instruments,Sight Glass Flow Indicators
J.W. WINCO

GN743-18-M27X1.5-A Oil Sight Glass

About The .GN 743 Fluid level sight glasses offers a variety of features such as genuine glass of high stability and scratch proof and sealing with an O-ring on the periphery and not on the face edge of the glass. The location of this seal allows also the softer elastomer which guarantees better and easier sealing

GN 743 Fluid level sight glasses offers a variety of features such as genuine glass of high stability and scratch proof and sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures. The seal is housed in a groove and it can therefore not be lost. The location of this seal allows also the softer elastomer which guarantees better and easier sealing. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.

Flow Measuring Instruments,Sight Glass Flow Indicators

GN743-18-M27X1.5-A Oil Sight Glass

Flow Measuring Instruments,Sight Glass Flow Indicators

Specifications of GN743-18-M27X1.5-A Oil Sight Glass

Category
Instockinstock

Last Updated

GN743-18-M27X1.5-A Oil Sight Glass
More Varieties

Rating :- 8.16 /10
Votes :- 33
GN 708.1 spindle assemblies are primarily used with toggle clamps.

GN 708.1 spindle assemblies are primarily used with toggle clamps.

The hexagon nuts are included.1-M8-68-B-ST Spindle Assembly They provide non-marking, yet secure clamping or holding of the workpiece via the toggle clamp.GN708..

  • Workholding & Machine Tool Accessories,Toolholder Accessories
  • J.W. WINCO
    • GN 806 soft protective caps can be used with hex head cap screws.

    GN 806 soft protective caps can be used with hex head cap screws.

    GN806-12-B Protective Cap This tapped insert type allows for expanded applications requiring, for example, extra long threaded pins.

  • Fastener Caps & Plugs
  • J.W. WINCO
    • JW Winco GN421-M8-30-NI Knurled Screw

    JW Winco GN421-M8-30-NI Knurled Screw

    On clamping operations, the partially protruding hub of the GN 421 hollow knurled screws prevents chipping of the plastic..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO
    • GN 451.1 vibration isolation mounts, also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers, are suitable for the elastic mounting of machine units such as motors, compressors and pumps.

    GN 451.1 vibration isolation mounts, also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers, are suitable for the elastic mounting of machine units such as motors, compressors and pumps.

    Their resilience and their broad range of different sizes and dimensions allow these mounts to be used in many applications that require vibration isolation.GN451.1-25-19-1/4X20-55 Rubber Bumper Stainless, Threaded Studs These rubber mounts are simple and economical construction elements.

  • Workholding & Machine Tool Accessories,Mounts and Vibration Control,Vibration Isolator Pads
  • J.W. WINCO
    • GN 451.1 vibration isolation mounts, also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers, are suitable for the elastic mounting of machine units such as motors, compressors and pumps.

    GN 451.1 vibration isolation mounts, also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers, are suitable for the elastic mounting of machine units such as motors, compressors and pumps.

    Their resilience and their broad range of different sizes and dimensions allow these mounts to be used in many applications that require vibration isolation.

  • Workholding & Machine Tool Accessories,Mounts and Vibration Control,Vibration Isolator Pads
  • J.W. WINCO