Electrician's Screwdriver For Slot-head Fully Insulated- Blade Width B: 5-5mm

Solid Carbide Drill, 4. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Standard: Manufacturer's standard Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 49.8 mm.

Carbide Turning Insert, WNMG431/WNMG080404 Cutting speed vc main application: 100 - 450 m/min.

5 mm Overall length L: 100 mm Shank dia Ds: 10 mm Shank square : 8 mm Tapping hole dia : 8.HSS-E-PM Blind Hole Machine Tap for Stainless Steel, M10 Tap Thread Size, TiAlN Coated The 45Deg helix angle of the flutes facilitates chip formation especially in ductile austenitic CrNi steels. - HSS-E-PM tool material for a high degree of wear resistance - The latest generation of TiALN multi-layer coating - Parameterised flute geometry for optimum chip formation and torsional rigidity Thread type: M Tool material: HSS E PM Standard: DIN 371 Tolerance class: ISO 2X 6HX Thread pitch: 1.

Impact Socket, 1 inch Drive, 6 pt, Deep, 1-7/16 inch Square drive: 1 in Length: 90 mm For safety reasons must always be secured using a suitable locking pin and O-ring.

Impact Socket, 3/4 inch Drive, 6 pt, Deep, 13/16 inch Square drive: 3/4 in dia drive output end: 38 mm Length: 85 mm For safety reasons must always be secured using a suitable locking pin and O-ring. Sturdy shape especially for use with electric or compressed air impact wrenches..

8 mm Flute length Lc: 33 mm Overall length L: 61 mm Shank dia Ds: 2.8 mm Through-coolant: no Standard: DIN 338 Tolerance nominal dia : h8 Point angle: 118 Deg Shank: Plain shank Number of cutting edges Z: 2 recommended maximum drilling depth L2: 28.

Tip thickness a: 1 mm Blade length: 125 mm overall length: 232 mm Multi-component power handle with grip zone optimised for torque and comfort. see tables part. Blade of high-alloy tool steel.Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.

3/8 inch Drive Socket, 12 pt, 7/16 inch Square drive: 3/8 in dia drive output end: 16 mm Length: 25.

From size 5.. Tip thickness a: 1 mm Blade length: 125 mm overall length: 232 mm Multi-component power handle with grip zone optimised for torque and comfort. Incorrect screwdriver size selection will cause damage to the screw head.

5 mm Close tolerance jaw sizes with HT drive profile protect corners of nuts and bolt heads.3/8 inch Drive Socket, 12 pt, 7/16 inch Square drive: 3/8 in dia drive output end: 16 mm Length: 25..