Hydraulic Hose WORLDWIDE HOSE

3-Port Industrial Unmanaged Ethernet Switch, 2 RJ45 10/100/1000BaseT(X), 1 1000BaseFX (Singlemode, ST style connector, 15Km) , DIN-Rail, Single Power Input 90-264VAC, -40°C-85°C.

WCR 166-11-01 Drip Guard.

Springer Parts 33 WL12 CSP.

Springer Parts 21 4WL4 CBSP.

Springer Parts 9 WL10 CSP.

56 SERIES FITTING FEMALE JIC 3 http://www.parker.com/crimpsource Markets: - Industrial - Mobile Equipment - Transportation Features/Benefits: - Consolidation of two series into one 55 and 58 = 56, thus reducing the customer inventory - Shorter and more compact than 55/58 Series for easier routing of assemblies in tight installation areas; short length may allow use of hose routing to replace current elbow fittings - Full length crimp of the sleeve no marking of crimp length needed; therefore easier, safer and faster crimping in comparison to 55 Series - Weight reduction up to 20% - Global part numbering with metric & inch hex and end connections to allow for global availability - Current 55 Series dies are qualified and can be used with the 56 Applications: - Medium pressure hydraulic applications - Agricultural equipment - Construction - Lubricating oils - Material Handling equipment - Machine tools - Waste and refuse trucks - Utility equipment Technical Specifications: - Some styles are available with metric hex; contact Parflex Customer Service for assistance. The 56 Series is shorter and more compact than the 55/58 Series Fittings, allowing for a system weight reduction of up to 20% and easier routing of assemblies during installation in tight, condensed spaces.

Sizes range from 1/4'' to 2'' in diameter to fit the requirements of various markets. The 302 hose is designed with a universal two-wire construction to meet global industry standards. Hydraulic hose WORLDWIDE HOSE Markets: - Transportation - Construction - Agriculture - Grounds & Building Maintenance - Forestry - Railroad - Utility Equipment - Machine Tool - Material Handling Features/Benefits: - Universal two-wire hose design manufactured to international specifications - Increased working pressures for improved reliability and expanded applications - Synthetic rubber inner tube for greater fluid compatibility and bio-oil resistance - 1150-5800 PSI working pressure in different sizes Industry Standards: - ISO 1436-1 Type 2SN / SAE J517 100R2AT / SAE J1942 / EN 853 Type 2SN Applications: - Petroleum base hydraulic fluids and lubricating oils Compatible Fittings: - 43 series fittings - 30 series fittings.Parker's 302 hose is a worldwide hydraulic industry standard hose manufactured to strict international quality specifications in order to provide consistency of performance.

42'' Partek Sleeve is available in either black or yellow and in sizes to fit most hydraulic hoses.. In addition, this weave gives an exceptionally smooth interior wall, allowing the rubber hose to move freely inside the sleeve without internal abrasion issues. First, per the ISO 6945 specification, the Partek Sleeve has a unique tubular weave construction in order to prevent abrasion which could wear through the sleeve.

The 302 hose is designed with a universal two-wire construction to meet global industry standards.

Partek Sleeve can be measured by the indide flat diameter A, or the inside open diameter B to determine the correct size for your application.