reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Signs & Labels,Safety Labels,Label Maker Tapes,Labels,Signs & Tags
BRADY

1 Mil Polyimide Circuit Board Labels 0.2 In H X 0.65 In W White 10000/RL

About The Service temperature of -94 to 212 deg F -70 to 100 deg C. A ribbon is required to print this material. ultra-durable matte white polyimide material is thermal transfer printable

Low-Profile Polyimide B-729 withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labeling. Use Part Number IP-R6002 for the BradyPrinter i5100 or BRADY IP Series Label Printer; use R6002 for a different printer. ultra-durable matte white polyimide material is thermal transfer printable. UL Approved;Meets requirements of MIL-STD-202G, Method 215K. High temperature low profile is ideal for processes requiring thin or lighter weight materials. A ribbon is required to print this material. Service temperature of -94 to 212 deg F -70 to 100 deg C.

Signs & Labels,Safety Labels,Label Maker Tapes,Labels,Signs & Tags

1 Mil Polyimide Circuit Board Labels 0.2 In H X 0.65 In W White 10000/RL

Signs & Labels,Safety Labels,Label Maker Tapes,Labels,Signs & Tags

Specifications of 1 Mil Polyimide Circuit Board Labels 0.2 In H X 0.65 In W White 10000/RL

Category
Instockinstock

Last Updated

1 Mil Polyimide Circuit Board Labels 0.2 In H X 0.65 In W White 10000/RL
More Varieties

Rating :- 9.74 /10
Votes :- 31
This slit coupling is manufactured by Reliance Precision Ltd.

This slit coupling is manufactured by Reliance Precision Ltd.

It can accommodate all forms of misalignment with low bearing loads helping to protect small sensitive bearings.630", Aluminum This Ruland supplied slit coupling is zero-backlash and has a balanced design for reduced vibration at high speeds up to 25,000 RPM. The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings.This short style slit coupling can fit in confined spaces where the long style may not fit.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
  • RULAND
    • The user can add a boot to protect the joint from unwanted contaminants and increase service life.

    The user can add a boot to protect the joint from unwanted contaminants and increase service life.

    495" (63. Single U-Joint, 1-7/16" x 35 mm Bores, 2.4mm) outer diameter, and a 7.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
  • RULAND
    • It has 1.125" x 0.875" bores, 1/4" x 3/16" keyways, 2.250" OD, and 3.200" length.

    It has 1.125" x 0.875" bores, 1/4" x 3/16" keyways, 2.250" OD, and 3.200" length.

    200", Alum Hardware is metric and tests beyond DIN 912 12.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
  • RULAND
    • Ruland clamp style shaft collars do not mar the shaft, are infinitely adjustable, and have superior holding power when compared to set screw collars.

    Ruland clamp style shaft collars do not mar the shaft, are infinitely adjustable, and have superior holding power when compared to set screw collars.

    Balanced Collar, 1pc Clamp, Balanced, Bore 50mm, 303 Stainless Steel Tightly controlled face to bore perpendicularity is maintained (TIR of This two-piece shaft collar has a 50mm bore, 78mm OD, and 19mm width.. It has a balanced design for better performance in high RPM applications.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Shaft Collars
  • RULAND
    • Ruland clamp style shaft collars do not mar the shaft, are infinitely adjustable, and have superior holding power when compared to set screw collars.

    Ruland clamp style shaft collars do not mar the shaft, are infinitely adjustable, and have superior holding power when compared to set screw collars.

    It has a balanced design for better performance in high RPM applications.Balanced Collar, 1pc Clamp, Balanced, Bore 50mm, 303 Stainless Steel Tightly controlled face to bore perpendicularity is maintained (TIR of This two-piece shaft collar has a 50mm bore, 78mm OD, and 19mm width.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Shaft Collars
  • RULAND