DIN319-AL-25-M6-C Ball Knob Aluminum

JW Winco GN 516-KG-35 Cam Latch This cam latch housing is designed for common applications such as making a tight and vibration-proof interlock in the end position (clamping position) in connection with an elastic sealing..

GN286-B25-B25-S-2-BL Swivel Clamp In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws and hex nuts with nylon insert. For the type with a stepless adjustment (Type S), swivel clamp connectors with a centering step are used.

JW Winco GN125. They are ideal wherever parts have to be clamped in a confined space or in a particular lever position.

. The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces. Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees.GN 605 socket set screws with full ball point (type A) are used in applications where a ball point contact is required.

. In contrast to a clamping operation utilizing only threads and a lateral force, these levers permit torque-free clamping via a combined downward vertical and cam actuated motion. The lever has been designed to ensure that its movement cannot exceed the maximum clamping position.GN927-82-M8-40-A-B Clamping Lever There are no loose components since all are assembled and mounted in their correct order.

.GN565-26-M8-112-SW Cabinet U-Handle The manufacturing process allows the production of special designs in relatively small quantities.

GN310-8-80-A-1/4X20-NI Gear Lever Stainless Steel Used for actuating the material flow through hydraulic valves via the lever handle or, used as control levers for on / off, start / stop applications where the lever handle is attached to set collars, split hubs, or eccentric cams, are example uses of these standard parts..

DIN319-AL-25-M6-C Ball Knob Aluminum Available with a tapped hole (Type C) or tapped insert (Type E).

.

.