reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Workholding & Machine Tool Accessories,Fixture Clamps
J.W. WINCO

GN810-75-C Vertical Toggle Clamp Steel

About The Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw. Type E version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component.GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction

GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position. Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw. Type E version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component. A spindle assembly with neoprene rubber tip is also included for Type C.

Workholding & Machine Tool Accessories,Fixture Clamps

GN810-75-C Vertical Toggle Clamp Steel

Workholding & Machine Tool Accessories,Fixture Clamps

Specifications of GN810-75-C Vertical Toggle Clamp Steel

Category
Instockinstock

Last Updated

GN810-75-C Vertical Toggle Clamp Steel
More Varieties

Rating :- 8.07 /10
Votes :- 29
GN 615.1 spring plungers are used as locating devices, detent pins, pressure pins and ejectors.

GN 615.1 spring plungers are used as locating devices, detent pins, pressure pins and ejectors.

Spring plungers mounted in various control levers are also perfect solutions for snap-indexing mechanism applications.1-M16-BS Spring Plunger Steel A typical example is push-on / push-off applications.GN615..

  • Machining,Detent,Lock,Pop And Plunger Pins
  • J.W. WINCO
    • GN 617 indexing plungers are standard components used for a wide range of indexing applications.

    GN 617 indexing plungers are standard components used for a wide range of indexing applications.

    GN617-5-M10X1-A-NI Indexing Plunger Type G and GK with threaded stem are for applications where a special knob or attachment is required, or for such cases where the spindle is linked directly to an operating mechanism.

  • Machining,Detent,Lock,Pop And Plunger Pins
  • J.W. WINCO
    • GN 608.6 indexing plungers are used in applications that require surface mounting, and the plunger pin needs to stay in its retracted position.
  • Machining,Detent,Lock,Pop And Plunger Pins
  • J.W. WINCO
    • GN212-28-M12-E Tension Lever Steel

    GN212-28-M12-E Tension Lever Steel

    GN 212 tension levers are used as clamping devices as well as operating levers..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • GN 6335.2 hand knobs with protruding hub have important advantages.

    GN 6335.2 hand knobs with protruding hub have important advantages.

    .JW Winco GN6335.2 12NCC8/E Star Knob The face of the hub is exactly square to the bore and is made of steel to prevent edge breakage.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO
    • GN 8170 indexing plungers are intended for use in hygienic areas and meet hygienic requirements on the knob side.

    GN 8170 indexing plungers are intended for use in hygienic areas and meet hygienic requirements on the knob side.

    The high surface quality (Ra .JW Winco GN8170-6-C-FH-H Indexing Plunger Wipers between the knob and the threaded body as well as the sealing ring between the threaded body and the housing keep the mechanics on the knob side sealed.

  • Workholding & Machine Tool Accessories,Spring Plungers
  • J.W. WINCO
    • Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw.
  • Workholding & Machine Tool Accessories,Fixture Clamps
  • J.W. WINCO
    • DIN 6379 double-ended threaded studs are typically used when it is not possible or practical to use T-slot bolts.

    DIN 6379 double-ended threaded studs are typically used when it is not possible or practical to use T-slot bolts.

    .DIN6379-M10-125 Double Ended Stud, Steel Subsequent installation of an additional clamp can be achieved even with T-slots of machine tables being covered.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw.

    Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw.

    In the clamped position the operating lever is in its vertical position. A spindle assembly with neoprene rubber tip is also included for Type C..GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction.

  • Workholding & Machine Tool Accessories,Fixture Clamps
  • J.W. WINCO
    • DIN 6379 double-ended threaded studs are typically used when it is not possible or practical to use T-slot bolts.

    DIN 6379 double-ended threaded studs are typically used when it is not possible or practical to use T-slot bolts.

    .DIN6379-M10-125 Double Ended Stud, Steel Subsequent installation of an additional clamp can be achieved even with T-slots of machine tables being covered.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO