Air Impact Wrench,Pin,6000 Rpm

Diamond Turning Insert, Chip-Breaker Code PS5, Inscribed Circle 3/8 in, TiAlN+Al2O3+ZrN, ANSI Code VBMT332-PS5 WSM20, Clearance Angle 5 Degrees.

Diamond Turning Insert, Chip-Breaker Code NF4, Inscribed Circle 1/2 in, TiAlN+Al2O3+ZrN, ANSI Code CNMG432-NF4 WSM10, Clearance Angle 0 Degrees.

06 in, Maximum Cutting Speed 28 in/min, Minimum Cutting Speed 20 in/min, Oxygen Flow Rate 5 to 11 scfh (Preheat), 55 to 65 scfh (Cutting).Cutting Tip, Compatible Fuel Type Acetylene, For Torch Type Handheld, Machine, Tip Series 1-108, Tip Size 0-SP-2, Tip Design One Piece, Minimum Cutting Thickness 3/8 in, Maximum Cutting Thickness 1/2 in, Compatible Manufacturer Victor, Application Pipe Cutting, Flame Type Medium Preheat, Fuel Flow Rate 5 to 10 scfh (Acetylene), Kerf Width 0.

Cutting Tip, Compatible Fuel Type Acetylene, For Torch Type Handheld, Machine, Tip Series 144, Tip Size 1, Tip Design One Piece, Maximum Cutting Thickness 3/8 in, Compatible Manufacturer Airco, Application Hand Cutting, Machine Cutting, Flame Type Medium Preheat, Fuel Flow Rate 3 to 20 scfh, Maximum Cutting Speed 18 in/min, Minimum Cutting Speed 21 in/min, Oxygen Flow Rate 84 scfh, Pressure Rating (Fuel) 3 psi, Pressure Rating (Oxygen) 30 psig.

Frock,Disposable,Snap Close,M,Package Quantity 25, Package Quantity 25.

HiVis Insulated Softshell Overalls.

Air Impact Wrench,Pin,6000 rpm Bolt Capacity 5/8 in, Drive Size 1/2 in Square, Drive Type Standard. Hose Size 3/8 in, Exhaust Location Rear, Duty Rating Industrial Duty, Breakaway Torque 500 ft-lb, Fastening Torque 500 ft-lb, Free Speed 6,000 RPM, Impact Rated No, Impact Sound Level 90 dB, Impacts per Minute 1,200, Number of Speed Settings 4, Max. Air Pressure 90 psi, Min.Impact Wrench, Power Source Air Powered, Air Consumption 21 cfm, Air Inlet 1/4 in NPT, Air Pressure 90 psi, Max.

250 in, Hardness Scale 188 to 223 BHN; Rockwell B90 to 97, Grade S7, Standards ASTM-A681, FED-QQ-T-570, SAE-J-437.Tool Steel Flat Stock, Steel Material, Width 3/4 in, Thickness 1/8 in, Fractional Size 1/8 in x 3/4 in x 18 in, Finish Unfinished, Length 18 in, Length Tolerance +0.125 to +0.

Air Impact Wrench,Pin,6000 rpm Bolt Capacity 5/8 in, Drive Size 1/2 in Square, Drive Type Standard.Impact Wrench, Power Source Air Powered, Air Consumption 21 cfm, Air Inlet 1/4 in NPT, Air Pressure 90 psi, Max.

Tool Steel Flat Stock, Steel Material, Width 3/4 in, Thickness 1/8 in, Fractional Size 1/8 in x 3/4 in x 18 in, Finish Unfinished, Length 18 in, Length Tolerance +0.250 in, Hardness Scale 188 to 223 BHN; Rockwell B90 to 97, Grade S7, Standards ASTM-A681, FED-QQ-T-570, SAE-J-437.125 to +0.