Hex Bushing, Brass, 1/2 X 1/8 In, NPTF

65 mm, Head Diameter 5.Socket Button Head Screw, Head Type Button, System of Measurement Metric, Drive Type Hex, Material Stainless Steel, Material Grade/Class 316, Finish Plain, Thread Size M3, Minimum Thread Length 5 mm, Fastener Length 5 mm, Head Height 1.7 mm, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Flange Diameter Not Applicable, Flange Thickness Not Applicable, Manufacturer Location Globally Sourced.

375 in, Retaining Rib Diameter Not Applicable, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Pack Size Small Pack, System of Measurement Inch, Hex Width Not Applicable, Color Silver, Dimensional Standards ASTM A582, Hex Width Tolerance Not Applicable, Inside Diameter Tolerance 0 to 0.005 in.

Reducing Coupling, Stainless Steel, 316, Class Class 150, 3/8 in, Female, BSPT, 19, 1/8 in, Female, BSPT, 28, 150 psi Maximum Operating Pressure.

Polyurethane Roll, Roll, Adhesive Type Plain Backing, Backing Type Non-Adhesive, Color Amber, Durometer 60A, Grade High Strength, Material Polyurethane, Standards ASTM D2000 GE 306, Maximum Temperature 180 Degrees F, Minimum Temperature -20 Degrees F, Overall Length 10 ft, Thickness Tolerance +/-0.022 in, Overall Width 36 in, Tensile Strength 3,000 psi, Texture Smooth, Overall Thickness 0.1875 in, Abrasion Resistance Good, Chemical Resistance Fair, Oil Resistance Fair, Water Resistance Good.

Case-Hardened 1060 Carbon Steel Linear Shafts, System of Measurement Inch.

Buna-N O-Ring, 4mm Wide 59mm ID, PK25 Range -40 Degrees to 250 Degrees F, FDA Approved No, Properties Resistant to Oils, Resistant to Water, Application Standard 59 mm, Actual Width 4 mm, Color Black, Durometer 70 Shore A, Nominal Outside Dia. 59 mm, Nominal Width 4 mm, Actual Inside Dia.67 mm, Temp.

Hex Bushing, Brass, Black Zinc-Plated, Class Class 1000, 1/2 in, Male, NPTF, 14, 1/8 in, Female, NPTF, 27, 1,000 psi Maximum Operating Pressure.

042 lb/cu in, Plastic Hardness Rockwell M88.75 Percent, Temperature Range -40 Degrees to 230 Degrees F, Plastic Density 0.

Hex Bushing, Brass, Black Zinc-Plated, Class Class 1000, 1/2 in, Male, NPTF, 14, 1/8 in, Female, NPTF, 27, 1,000 psi Maximum Operating Pressure.

75 Percent, Temperature Range -40 Degrees to 230 Degrees F, Plastic Density 0.75 in, Black, Plastic Clarity Opaque, Tensile Strength 13,000 psi, Impact Strength 0.16, Water Absorption 0.