reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Vacuums & Steamers,Vacuum Accessories
DUSTLESS TECHNOLOGIES

Soft Cuff For 1.5 Hose To 2 I.D.

About The .D.Soft Cuff for 1

Soft Cuff for 1.5 In. Hose to 2 In. I.D.

Vacuums & Steamers,Vacuum Accessories

Soft Cuff For 1.5 Hose To 2 I.D.

Vacuums & Steamers,Vacuum Accessories

Specifications of Soft Cuff For 1.5 Hose To 2 I.D.

Category
Instockinstock

Last Updated

Soft Cuff For 1.5 Hose To 2 I.D.
More Varieties

Rating :- 8.15 /10
Votes :- 32
Shaft Seal, 54 x 70 x 10 mm., TC, Nitrile Rubber

Shaft Seal, 54 x 70 x 10 mm., TC, Nitrile Rubber

Rotary Shaft Seal, Design Code TC, Inside Diameter 54 mm, Outside Diameter 70 mm, Overall Width 10 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 2, System of Measurement Metric, Case Coating None.

  • Motors,Motor Supplies,Shaft Seals & Adapters
  • DDS
    • Shaft Seal,110mm I. D.,135mm O. D.

    Shaft Seal,110mm I. D.,135mm O. D.

    Rotary Shaft Seal, Design Code SC, Inside Diameter 110 mm, Outside Diameter 135 mm, Overall Width 13 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, System of Measurement Metric, Case Coating None.

  • Motors,Motor Supplies,Shaft Seals & Adapters
  • DDS
    • Shaft Seal,TC,2.875in ID,Nitrile Rubber

    Shaft Seal,TC,2.875in ID,Nitrile Rubber

    75 in, Overall Width 0.375 in, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 2, System of Measurement Inch, Case Coating None.

  • Motors,Motor Supplies,Shaft Seals & Adapters
  • DDS
    • Shaft Seal,SF,50mm ID,Nitrile Rubber

    Shaft Seal,SF,50mm ID,Nitrile Rubber

    Rotary Shaft Seal, Design Code SF, Inside Diameter 50 mm, Outside Diameter 72 mm, Overall Width 8 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, System of Measurement Metric, Case Coating None, Maximum Surface Speed 999 mps, Seal Type Single Lip Seal.

  • Motors,Motor Supplies,Shaft Seals & Adapters
  • DDS
    • Shaft Seal, 80 x 95 x 5 mm., VC, Nitrile Rubber

    Shaft Seal, 80 x 95 x 5 mm., VC, Nitrile Rubber

    Rotary Shaft Seal, Design Code VC, Inside Diameter 80 mm, Outside Diameter 95 mm, Overall Width 5 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, Spring Material Not Applicable, System of Measurement Metric, Case Coating None.

  • Motors,Motor Supplies,Shaft Seals & Adapters
  • DDS
    • Shaft Seal,107.95mm I. D.,139.7mm O. D.

    Shaft Seal,107.95mm I. D.,139.7mm O. D.

    5 in, Overall Width 0.25 in, Outside Diameter 5.5 in, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 2, System of Measurement Inch, Case Coating None.

  • Motors,Motor Supplies,Shaft Seals & Adapters
  • DDS
    • Soft Cuff for 1.5 In.

    Soft Cuff for 1.5 In.

    5" Hose to 2" I.

  • Vacuums & Steamers,Vacuum Accessories
  • DUSTLESS TECHNOLOGIES
    • Diamond Turning Insert, Diamond, 3/8 in, DCMT, 55 Degrees, 1/64 in, Carbide

    Diamond Turning Insert, Diamond, 3/8 in, DCMT, 55 Degrees, 1/64 in, Carbide

    Diamond Turning Insert, Chip-Breaker Code XQ, Inscribed Circle 3/8 in, TiCN+Al2O3+TiN, ANSI Code DCMT3251XQ CA515, Chip-Breaker Style On One Side, Clearance Angle 7 Degrees.

  • Cutting Tools,Indexable Tools,Rhombic Turning Inserts
  • KYOCERA
    • Soft Cuff for 1.5 In.

    Soft Cuff for 1.5 In.

    I.Soft Cuff for 1.

  • Vacuums & Steamers,Vacuum Accessories
  • DUSTLESS TECHNOLOGIES
    • Diamond Turning Insert, Diamond, 3/8 in, DCMT, 55 Degrees, 1/64 in, Carbide

    Diamond Turning Insert, Diamond, 3/8 in, DCMT, 55 Degrees, 1/64 in, Carbide

    Diamond Turning Insert, Chip-Breaker Code XQ, Inscribed Circle 3/8 in, TiCN+Al2O3+TiN, ANSI Code DCMT3251XQ CA515, Chip-Breaker Style On One Side, Clearance Angle 7 Degrees.

  • Cutting Tools,Indexable Tools,Rhombic Turning Inserts
  • KYOCERA