21G, HPPE, FOAM NITRILE, A5

867 in x 1.250 in Quick Connect Tab, Mounting Hole 0.Rocker Switch, Contact Form DPST, Number of Connections 4, Switch Function On/Off, Terminals 0.734 in, AC Contact Rating 10A @ 250V AC, 15A @ 125V AC, DC Contact Rating 15A @ 28V DC, HP 3/4 hp, Standards UL Recognized/ CSA, Special Features Non-Illuminated.

Toggle Switch,SPDT,10A @ 277V,QuikConnct and Thread Size 0.

16 lb.25 in, Compatible Pipe Size 1 in, Iron, Finish Electroplated, Gray, Overall Length 3 1/32 in, Overall Width 1 9/32 in, Overall Height 17/32 in, Compatible Conduit Trade Size 1 in, Compatible Conduit Type IMC, RMC, Compatible Nominal Conduit/Pipe Size 1 in, 1 1/4 in, Elongated Bolt Holes, For Use With Conduit, Outdoor Only, Mounting Location Surface, Mounting Type Screw On, UL, Steel Thickness Not Applicable, Conduit Clamps, Weight 0.Back Spacer, Wire Range 1 in to 1.

Electrical Box Cover, Box Type Square, Cover Type Duplex Receptacle, Number of Gangs 2, Material Galvanized Zinc, Depth 1/2 in, Width 4 in, Length 4 in, Characteristics Duplex Receptacle, Capacity 6.5 cu in, Raised Height 1/2 in, Design Crushed Corner, Includes Screws.

Structural, Insulated Yes, Fire and Rescue Boot Compliance ASTM F2413-11, NFPA 1971, Current Edition, Size 9, Footwear Width W, Men's, Chain Saw Cut Resistant No, Toe Type Steel, Waterproof Yes, Footwear Closure Type Pull On, Style Number 807-6003, Black/Silver, Footwear Construction Type Vulcanized, Footwear Sole Pattern Traction Lug, Heel Height 3/4 in, Boot Height 14 in, Resists Flame, Heat, Punctures, Slip, 1 Pair.

Impact Drive Socket Adapter,1/4",Male Drive Socket Adapter, Black Oxide, Locking Yes, Output Drive 1/4, Output Drive Shape Square, Output Drive Size 1/4 in, Output Drive Gender Male, Impact, Power, Input Drive 1/4 in (M) 6-Point, Input Drive Shape Hex, Input Drive Size 1/4 in, Input Drive Gender Male.

Cut Resistant Glove, ANSI/ISEA Cut Level A5, Glove Style Seamless Knit, Knit Material HPPE, PolyKor, ANSI/ISEA Abrasion Level 4, Hand Protection Style Glove, ANSI/ISEA Impact Force Not Applicable, Additional Hazard Protection Abrasion-Resistant, Chemical-Resistant, Cut-Resistant, Puncture-Resistant, Tear-Resistant, Glove Insulation Material Foam, EN 407 Contact Heat Level Not Applicable, Leather Palm Material Not Available, EN 388 Rating 3X42E.

1, Package Quantity 25.8.8.

Cut Resistant Glove, ANSI/ISEA Cut Level A5, Glove Style Seamless Knit, Knit Material HPPE, PolyKor, ANSI/ISEA Abrasion Level 4, Hand Protection Style Glove, ANSI/ISEA Impact Force Not Applicable, Additional Hazard Protection Abrasion-Resistant, Chemical-Resistant, Cut-Resistant, Puncture-Resistant, Tear-Resistant, Glove Insulation Material Foam, EN 407 Contact Heat Level Not Applicable, Leather Palm Material Not Available, EN 388 Rating 3X42E.

1, ASME B18.8.1, Package Quantity 25.Cotter Pin, System of Measurement Inch, Pin Diameter 5/64 in, Pin Type Bridge, Material Steel, Material Grade/Class Ungraded, Finish Zinc Plated, Usable Length 1 3/32 in, Product Type Cotter Pin, Shank Length 1 3/32 in, Fits Maximum Shaft Diameter 3/8 in, Fits Minimum Shaft Diameter 5/16 in, Manufacturer Location Made in USA*, Standards ANSI B18.