White UHMW Polyethylene Plastic Bar 48 L, 6 W

4 Percent, Temperature Range -40 Degrees to 190 Degrees F, Plastic Density 0.6 ft-lb/in, Friction Coefficient 0.5, Water Absorption 0.038 lb/cu in, Plastic Hardness Rockwell R105.

4 mm, Actual Inside Dia.6mm ID, PK100 Range -40 Degrees to 250 Degrees F, FDA Approved No, Properties Resistant to Oils, Resistant to Water, Application Standard 9.

1 ft-lb/in, Friction Coefficient 0.Plastic Sheet Stock, HDPE, Grade Marine, Plastic Length 6 in, Plastic Width 6 in, Plastic Thickness 1 in, Black, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 1.05 Percent, Temperature Range -100 Degrees to 180 Degrees F, Plastic Density 0.31, Water Absorption 0.

Oil Resistant Buna-N Rubber.

90 mm, Nominal Width 2 mm, Actual Inside Dia. Buna-N O-Ring, 2mm Wide 90mm ID, PK10 Range -40 Degrees to 250 Degrees F, FDA Approved No, Properties Resistant to Oils, Resistant to Water, Application Standard 90 mm, Actual Width 2 mm, Color Black, Durometer 70 Shore A, Nominal Outside Dia. O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

Cam and Groove Gasket,1-1/16 1 1/16 in, Encapsulated.

01 Percent, Plastic Density 0.Rectangle Stock, UHMW Polyethylene, Standard, Plastic Length 4 ft, Plastic Width 6 in, Plastic Thickness 0.

Full Face Flange Gasket, Gasket Material EPDM, Insert Material None, For Pipe Size 2 in, For Flange ANSI Class 150, Binder Material None, Color Black, Inside Diameter 2 3/8 in, Minimum Operating Temperature -30 Degrees F, Maximum Operating Temperature 250 Degrees F, Outside Diameter 6 in, Thickness 1/8 in, Number of Bolt Holes 4, Bolt Hole Diameter 3/4 in, Gasket Type Full-Face Gasket, Metal Detectable Gasket No, Included Fasteners Not Applicable, Hardness Shore 60A.

0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.

Full Face Flange Gasket, Gasket Material EPDM, Insert Material None, For Pipe Size 2 in, For Flange ANSI Class 150, Binder Material None, Color Black, Inside Diameter 2 3/8 in, Minimum Operating Temperature -30 Degrees F, Maximum Operating Temperature 250 Degrees F, Outside Diameter 6 in, Thickness 1/8 in, Number of Bolt Holes 4, Bolt Hole Diameter 3/4 in, Gasket Type Full-Face Gasket, Metal Detectable Gasket No, Included Fasteners Not Applicable, Hardness Shore 60A.