Tester,4-Way,3 In

272 in, Minimum Material Thickness 27/64 in, Maximum Material Thickness 1/2 in, Material Grade/Class IFI-114-30, Mandrel Material Steel, Minimum Hole Diameter 0.25 in, Product Type Blind Rivet, Body Material Steel, Finish Zinc Plated, Head Type Dome, Head Diameter 17/32 in, Head Angle Not Applicable, Shear Strength 3,000 lb, Tensile Strength 1,900 lb, Maximum Hole Diameter 0.Blind Rivet, System of Measurement Inch, Overall Length 2 21/64 in, Body Length 51/64 in, Shank Diameter 0.261 in.

Ball Valve, Body Material 316 Stainless Steel, Body Style Inline, 2-Piece, Pipe Size 1/4 in, Connection Type FNPT x MNPT, Full Port, Max.

The carbon steel blade of this knife is 3 in. length overall with a 4 1/2 in.

-9, Overall Length 3 ft, Tensile Strength 150,000 psi, System of Measurement Inch, Thread Direction Right Hand, End Type Straight Cut, Dimensional Standards SAE J429, Includes Nuts No, Nut Height Not Applicable, Nut Width Not Applicable, Color Black, Number of Nuts Included 0, Rockwell Hardness HRC33, HRC34, HRC35, HRC36, HRC37, HRC38, HRC39, Package Quantity 3.Fully Threaded Stud, Material Grade/Class Grade 8, Material Steel, Finish Black Oxide, Thread Size 7/8 In.

Bulkhead Union, Application Air, Vacuum, Fitting Side A Connection Type Push-to-Connect, Fitting Side B Connection Type Push-to-Connect, Fitting Side A Tube Outer Diameter 8 mm, Fitting Side B Tube Outer Diameter 8 mm, Fitting Material Brass, Color Silver, Includes Pre-Applied Thread Sealant Yes, Maximum Operating Pressure 290 psi, Maximum Operating Temperature 160 Degrees F, Overall Length 1 15/32 in, Specific Fitting Shape Straight Bulkhead Union.

Sludge Judge Bottom Section,Valve 5 ft., Head Material Plastic, Product Type Liquid Sampling Kit (Bottom Section with Rope), Capacity - Metric 445 mL, Capacity - Imperial 15 fl oz, Pre-Cleaned Visible Particulates, Color Black, Clear, Red, Overall Length - Imperial 5 ft, Graduation Subdivisions 3 fl oz, Dipper Diameter - Imperial 3/4 in, Sterile/Non-Sterile Non-Sterile, Removable Handle No, Material Grade Not Applicable, Minimum Handle Length 5 ft, Maximum Handle Length 5 ft.

Tester, Product Type Tester, Connection Type 4-Way, For Use With SAE J1128 4-Flat Vehicle Connector, Color Black, Red, Material Brass, Copper, Polycarbonate, PVC, Diameter Not Applicable, Overall Length 3 in, Height 5 1/2 in, Overall Width 3 in, Standards SAE J1128, Features Bright Red LED Output, Can Hook On Key Chain, Checks Each Electrical Circuit for Continuity, Corrosion Resistant Design, Designed for 12V Systems, LED Indicator, Small Compact Design for Easy Storage, Includes LED Indicator.

38 in, For Cable Type Wire Rope, Maximum Load Capacity 2,200 lb, Grip Type Coni-Klam, Jaw Shape Round Serrated, Tool Series Coni-Klam, Includes Hot Latch No, Includes Locking Handle No, Includes Spring No, Includes Swing Latch No, Material Steel, Minimum Cable Diameter 0.Wire Rope Gripper, Maximum Cable Diameter 0.

Tester, Product Type Tester, Connection Type 4-Way, For Use With SAE J1128 4-Flat Vehicle Connector, Color Black, Red, Material Brass, Copper, Polycarbonate, PVC, Diameter Not Applicable, Overall Length 3 in, Height 5 1/2 in, Overall Width 3 in, Standards SAE J1128, Features Bright Red LED Output, Can Hook On Key Chain, Checks Each Electrical Circuit for Continuity, Corrosion Resistant Design, Designed for 12V Systems, LED Indicator, Small Compact Design for Easy Storage, Includes LED Indicator.

Wire Rope Gripper, Maximum Cable Diameter 0.38 in, For Cable Type Wire Rope, Maximum Load Capacity 2,200 lb, Grip Type Coni-Klam, Jaw Shape Round Serrated, Tool Series Coni-Klam, Includes Hot Latch No, Includes Locking Handle No, Includes Spring No, Includes Swing Latch No, Material Steel, Minimum Cable Diameter 0.19 in.