Masonry Chisel,1/2 In. X 8 In.

-18, 3/8 in, Female, NPT, 5/8 in, 18, 3/8 In.-18, 3/8 in, Female, NPT, 5/8 in, 18, 3/8 In.Tee, Brass, C38500, Class Class 250, For Pipe Schedule 80, 3/8 in, Female, NPT, 5/8 in, 18, 3/8 In.-18, 400 psi Maximum Operating Pressure.

Plastic Rod, CPVC, Grade Standard, Plastic Length 3 ft, Plastic Diameter 1 1/2 in, Gray, Plastic Clarity Opaque, Minimum Temperature 30 Degrees F, Maximum Temperature 200 Degrees F, Tensile Strength 7,500 psi, Impact Strength 1.

034 lb/cu in, Corrosion and Chemical Resistance Good.05 Percent, Plastic Density 0.

Solder Pressure Elbows, Application Potable Water, Fitting Side A Connection Type Cup, Fitting Side B Connection Type FTG, Fitting Side A Copper Tube Size 3/4 in, Fitting Side B Copper Tube Size 3/4 in, Fitting Material Copper, Fitting Side A Tube Outer Diameter 3/4 in, Fitting Side B Tube Outer Diameter 3/4 in, Maximum Operating Pressure 700 psi, Maximum Operating Temperature 250 Degrees F, Specific Fitting Shape 45 Degrees Street Elbow.

90 Degrees Elbow, Steel, Zinc Plated, 3/4 in, Female, NPT, 1/2 in, Female, NPTF, 3000 psi Maximum Operating Pressure.

Knockout Punch, For Use With Tool Type Knockout Tools, Knockout Punch Component Included Punch, Material Application Mild Steel, Stainless Steel, Maximum Sheet Metal Capacity-Steel 12 ga, Nominal Hole Size 1 in, Slug Type Splitting, Punch Shape Round, Number of Pieces 1, Includes Draw Stud No, Exact Hole Diameter 1 19/50 in, Series Exact.

Cape Chisel, Chisel Type Cape Chisel, Material Applications For Metal, Blade Tip Shape Half Round, Blade Width 1/2 in, Includes Striking Cap No, Includes Handle No, Material Steel, Grip Style Plain, Overall Length 8 in, Handle Material Steel, Non-Sparking No, Tether Ready No, Blade Length 0 in, Blade Tip Hardness 55 to 57 HRC, Corrosion-Resistant Yes, Features Cutting Semi-Circular Grooves for Oil Ways in Bearings, Finish Black Oxide.

Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 3 mm, Material Steel, Material Grade/Class Class 12.

Cape Chisel, Chisel Type Cape Chisel, Material Applications For Metal, Blade Tip Shape Half Round, Blade Width 1/2 in, Includes Striking Cap No, Includes Handle No, Material Steel, Grip Style Plain, Overall Length 8 in, Handle Material Steel, Non-Sparking No, Tether Ready No, Blade Length 0 in, Blade Tip Hardness 55 to 57 HRC, Corrosion-Resistant Yes, Features Cutting Semi-Circular Grooves for Oil Ways in Bearings, Finish Black Oxide.

9, Finish Zinc Plated, Thread Size M4-0.7, Minimum Thread Length 6 mm, Fastener Length 6 mm, Head Height 4 mm, Head Diameter 7 mm, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards DIN 912, Flange Diameter Not Applicable, Flange Thickness Not Applicable.Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 3 mm, Material Steel, Material Grade/Class Class 12.