6 1/4 In Crimper RG-59, RG-6

3, Flange Diameter Not Applicable, Flange Thickness Not Applicable.-18, Minimum Thread Length 1 3/8 in, Fastener Length 1 3/4 in, Head Height 0.312 in, Head Diameter 0.469 in, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.

Male Run Tee, Application Air, Cutting Fluids, Inert Gases, Color Black, Fitting Side A Connection Type Push-to-Connect, Fitting Side B Connection Type MBSPP, Fitting Side C Connection Type Push-to-Connect, Includes Pre-Applied Thread Sealant Yes, Fitting Side B Pipe Size 1/8 in, Fitting Side C Pipe Size 1/8 in, Fitting Side A Tube Outer Diameter 6 mm, Fitting Side B Tube Outer Diameter 6 mm, Fitting Side C Tube Outer Diameter 6 mm, Fitting Material Nylon, Maximum Operating Pressure 290 psi.

Reducing Adapter, Steel, Zinc Plated, 1 1/2 in, Male, NPTF, 1 1/4 in, Female, NPTF, 2,500 psi Maximum Operating Pressure.

Dial Indicator,0.01-10mm, Range 0 to 10 mm, Graduations 0.015 mm, Long Form Calibration Certificate No, AGD Number AGD 2, Back Type Lug, Dial Color White, Dial Reading 0-100, Dial Size 57 mm, Dimension Type Metric, Included Certification Certificate of Inspection, Maximum Measurement - mm 10 mm, Minimum Measurement - mm 0 mm, Number of Indicators 1, Operation Type Plunger, Range per Revolution 1 mm, Reading Continuous, Bearing Type Plain, Bezel Lock No, Case Type Case.

11.Roundsling,Eye & Eye,10 ft L,2600 lb Cap Range -60 to 200 Degrees F, Resists Abrasion, UV Sunlight, Grease and Most Acids, Standards ASME B30.9, WSTDA, Includes Tuflex Safety Bulletin Rev 8.

Countersink Set, 60 Degrees , 5, Cobalt, Bright (Uncoated).

Mechanics Gloves, Additional Hazard Protection None, Glove Style Mechanics, Cut-Resistance Coverage Palm Side, Palm Style Single Layer, Backing Style Polyester with TPR Rubber Knuckle Protection, Cuff Style Hook-and-Loop, Insulated No, Palm Material Synthetic Leather, Silicone-Free No, Glove Liner Material Unlined, Glove Back Material Polyester, Glove Back Color Orange/Lime, Glove Construction Cut and Sewn, Knuckle Protection Material TPR, Standards EN, ANSI/ISEA Cut Level A2.

The zinc die cast crimper has a protective power coated paint finish that resists scratches and corrosion.. If you work with wire, the Ideal 33-632 Crimper will prove to be an essential part of your tool kit.It features an adjustable manual mechanism to suit your needs.

Mechanics Gloves, Additional Hazard Protection None, Glove Style Mechanics, Cut-Resistance Coverage Palm Side, Palm Style Single Layer, Backing Style Polyester with TPR Rubber Knuckle Protection, Cuff Style Hook-and-Loop, Insulated No, Palm Material Synthetic Leather, Silicone-Free No, Glove Liner Material Unlined, Glove Back Material Polyester, Glove Back Color Orange/Lime, Glove Construction Cut and Sewn, Knuckle Protection Material TPR, Standards EN, ANSI/ISEA Cut Level A2.

It can strip and crimp RG-59, RG-6 cables. 6 1/4 in Crimper RG-59, RG-6 The Ideal 33-632 6 1/4 in Crimper is a must-have tool for working with wire.