1/2 Inch Drive 7/8 X 15/16 Inch Thin Wall Impact Flip Socket

.Kraken 5 Light Vanity This brushed nickel steel wall sconce gains soft touches from a romantic clear seedy glass shade and delivers a sophisticated, artistic addition to contemporary or transitional decor.

0.

0.

. Auburn Espresso Brown Finished Wood 6-Drawer Dresser The Auburn requires assembly.

SBR Rubber Push-In Grommet for 9/16" Hole ID and 1/16" Edge Thickness - 5/16" ID - Pack of 50.

SBR Rubber Push-In Grommet for 5/16" Hole ID and 1/8" Edge Thickness - 3/16" ID - Pack of 100.

TEKTON Thin Wall Impact Flip Sockets are ideal for servicing wheels on cars, trucks, utility trailers, and more. 1/2 Inch Drive 7/8 x 15/16 Inch Thin Wall Impact Flip Socket Each socket meets a minimum of 1. The outer diameter of each socket is 1 to 2 mm smaller than other TEKTON impact sockets, allowing for better access in tight lug nut wells.

•High Leverage –We designed these L-keys to be longer than most other 'jumbo'-sized keys in order to increase leverage when it matters•Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency•6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle•Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion•Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking.

The outer diameter of each socket is 1 to 2 mm smaller than other TEKTON impact sockets, allowing for better access in tight lug nut wells.3 times the ANSI/ASME standard for proof torque.

•High Leverage –We designed these L-keys to be longer than most other 'jumbo'-sized keys in order to increase leverage when it matters•Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency•6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle•Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion•Clear Markings – Tekton L-key sizes are marked in two ways, with a high-visibility laser marking and a stamped marking.