GSC477X45 BT40 Coolant Through Retention Knob With M16x2 Drawbar Thread

Material High Speed Steel Blade Diameter Inch 4 Blade Thickness Inch 316 Arbor Hole Diameter Inch 114 Connection Type Arbor Number of Teeth 36 Plain tooth with side chip clearance High Speed Steel.

- Easy to read dial face with jeweled movement - 1.61"/42mm dial face - Flat back (attached) and lug back supplied, Instruction manual.

Drill Blank Size Decimal Inch 0116 Drill Blank Size Wire 32 Blank Length Inch 234 Made from hardened HRC 6365 high speed steel and ground, can be used as punches, gauges, pins or ground for special tools High Speed Steel 00000 00003.

Series Name 3 Diameter mm 38 Diameter Decimal Inch 14961 Series CodeSeat Size 3 Material High Speed Steel Coating TiAlN Thickness Inch 14 Included Angle 132 For general purpose applications in a variety of materials and for drilling in applications where added toughness is required such as unstable set ups on manual machines or cross hole drilling Series 14 132Deg point Series 57 144Deg point.

Mill Diameter Inch 1 Number of Flutes 3 Pitch Coarse Length of Cut Inch 1 Shank Diameter Inch 1 Material Cobalt FinishCoating TiAlN Overall Length Inch 312 Center Cutting Yes.

Drill Bit Size Inch: 5/32in Drill Point Angle Degrees: 135 Drill Bit Material: High Speed Steel Drill Bit Finish/Coating: Black Oxide Flute Type: Spiral Flute Cutting Direction: Right Hand Shank Type: Straight Coolant Through: No 135 degree split point Steam oxide coating High Speed Steel.

Please have ready the following information when calling: - Taper of machine - Make & Model of the machine - Draw Bar thread diameter and pitch - Taper Angle required underneath head of stud - Optionally: Solid or Coolant Thru.GSC477X45 BT40 Coolant Through Retention Knob With M16x2 Drawbar Thread We invite your inquiries.

Cutter Diameter Inch 5 Cutting Width Inch 716 Tooth Configuration Plain Material High Speed Steel FinishCoating Uncoated Arbor Hole Diameter Inch 1 Number of Teeth 24.

GSC477X45 BT40 Coolant Through Retention Knob With M16x2 Drawbar Thread We invite your inquiries. Please have ready the following information when calling: - Taper of machine - Make & Model of the machine - Draw Bar thread diameter and pitch - Taper Angle required underneath head of stud - Optionally: Solid or Coolant Thru.

Cutter Diameter Inch 5 Cutting Width Inch 716 Tooth Configuration Plain Material High Speed Steel FinishCoating Uncoated Arbor Hole Diameter Inch 1 Number of Teeth 24.