Clevis Pin,Std,Steel,0.562x2 In,PK10

Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Letter, I.

250 in SP 382 cfm, Noise Level @ 0.200 in SP 390 cfm, Exhaust Airflow @ 0.100 in SP @ 5 ft 2 sones, Fan Wattage 144 W, Frequency 60 Hz, Full Load Current 1.In-Line Ceiling Exhaust Fan, Discharge Direction Horizontal/Vertical, Duct Diameter Not Applicable, Duct Height 8 in, Duct Width 8 in, Duct Shape Square, Nameplate Voltage 115V AC, Exhaust Airflow @ 0.

Sprinkler Pump, Phase Three, Pump Housing Material Cast Iron, Horsepower 2 hp, Nameplate Voltage 208-240/480V AC, Suction Lift (Maximum) 25 ft, Flow Rate @ 5 psi 86 gpm, Flow Rate @ 10 psi 86 gpm, Flow Rate @ 20 psi 86 gpm, Maximum Feet of Head 125 ft, Shut Off Pressure (Maximum) 55 psi, Compatible Intake Pipe Size 1 1/2 in, Compatible Discharge Pipe Size 1 1/2 in, Intake Type NPT, Motor Enclosure Open Dripproof, Flow Rate @ 30 psi 80 gpm, Flow Rate @ 40 psi 65 gpm, Priming Self-Priming.

50, Motor Type 3-Phase, Body Material Cast Iron, Impeller Material Cast Iron, Shaft Seal Material - Pumps Silicone Carbide, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, Flow Rate @ 15 Ft. Sewage Ejector Pump, HP 1, Rated Voltage 230V AC, Phase - Pumps 3, Amps 7..

50 ft.

003/-0.

8.010/-0.

, Galvanized Steel, Nylon Coated, 5 PK 3/64 in, Length 18 in, Fits Shaft Dia. -, Meets/Exceeds -, PK 5.2 Loops and Tab Lanyard, 18 in, 3/64 in Pin Dia.

010/-0.166 in, Minimum Hole Size 0.8.151 in, Number of Holes 1, Shank Length 2 in, System of Measurement Inch, Standards ANSI B 18.

2 Loops and Tab Lanyard, 18 in, 3/64 in Pin Dia.