HV8 8 HorizontalVertical Rotary And Dividing Table

4.0mm Diameter x 4mm Shank 2-Flute Long Length Blue Series Carbide End Mills These end mills have the capability to mill much thicker material in a single pass, thereby eliminating the interrupted cut that may be present with regular length end mills.

Drill Bit Size mm 32 Shank Taper Designation MT1 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Overall Length Inch 518 Through Coolant No.

These taps are designed to produce less cutting pressure in a variety of applications.

Typhoon ball nose end mills are designed for contour milling applications in hardened materials..

GS TOOLING 338716 22.0mm SA25 Collets.

Drill Bit Size mm 24 Drill Point Angle Degrees 135 Drill Bit Material Cobalt Drill Bit FinishCoating Gold Finish Flute Type Spiral Cutting Direction Right Shank Type Straight Coolant Through No Heavy duty 135Deg split point.

Mill Diameter Inch 58 Number of Flutes 2 Material Cobalt Length of Cut Inch 118 Shank Diameter Inch 58 FinishCoating Bright Single or Double End Double Center Cutting Yes Overall Length Inch 412 Flute Direction Right Cutting Direction Right Variable Helix No Helix Angle 30 Excellent tool geometry for slotting, keying and general purpose milling, plus the added economy offered by the doubleend design 2 helical flutes Centre cutting Double end with weldon shank.

Setting Position Horizontal Vertical Tilting No CrossSlide No Table Diameter Inch 8 TSlot Width Decimal Inch 055 This HV Type Rotary Table is so designed as to permit machining operations at a higher dimension than that of RT Type Rotary tables The base can be used in a vertical position to enable the carrying out of centre work x000D Worm gear 901.

Mill Diameter Inch 58 Number of Flutes 2 Material Cobalt Length of Cut Inch 118 Shank Diameter Inch 58 FinishCoating Bright Single or Double End Double Center Cutting Yes Overall Length Inch 412 Flute Direction Right Cutting Direction Right Variable Helix No Helix Angle 30 Excellent tool geometry for slotting, keying and general purpose milling, plus the added economy offered by the doubleend design 2 helical flutes Centre cutting Double end with weldon shank.

Setting Position Horizontal Vertical Tilting No CrossSlide No Table Diameter Inch 8 TSlot Width Decimal Inch 055 This HV Type Rotary Table is so designed as to permit machining operations at a higher dimension than that of RT Type Rotary tables The base can be used in a vertical position to enable the carrying out of centre work x000D Worm gear 901.