Replacement Sensor,Detects Oxygen

1, BIS, Teeth Heat Treatment Hardened Teeth, Tooth Width 0.49 in, Pitch Diameter 3.134 in, Chain Number 60, For Number of Strands Single, Maximum Bore Diameter 1 1/4 in, Finish Black Oxide, Hub Diameter 2 1/4 in, Hub Projection 0.666 in, Hub Type One Side, Length through Bore 1 1/8 in, Standards ANSI B29.

124 in, Bore Type Plain, Chain Number 25, Finish Black Oxide, Hub Diameter 13/16 in, Hub Projection 0.39 in, Keyway No, Keyway Depth Not Applicable, Keyway Width Not Applicable, Length through Bore 1/2 in, Number of Set Screws 0, Set Screw Location Not Applicable.

Roller Thrust Bearing Washer, Bore Diameter 1 1/2 in, Compatible Bearing 2435, For Thrust Bearing Type Needle Roller, Lubrication Type Lubrication Required, Maximum Temperature 250 Degrees F, Minimum Temperature -5 Degrees F, Outside Diameter 2 3/16 in, Self Lubricating Bearing No, System of Measurement Inch, Washer Thickness 1/16 in, Maximum PV Not Applicable, Series TRB, TWB, Washer Material Alloy Steel, Washer Material Grade 52100.

Pillow Block Bearing, Base Height 0.984 in, Base Width 2.

Angular Contact Ball Bearing, Ball Material Alloy Steel, Bearing Industry Number 3202/5202, Bore Diameter 15 mm, Cage Material Polyamide, Closure Double Sealed, Contact Bearing Type Angular Contact, Lubricant Material SRI 2 Grease, Polyrex EM Grease, Matched Bearing Type Not Matched/Single Bearing, Maximum Speed 15,000 RPM, Maximum Temperature 175 Degrees C, Minimum Temperature -40 Degrees C, Number of Rows Two, Outside Diameter 35 mm, Overall Width 15.

52 in, Pitch Diameter 3.

Gas Detector Sensor, Gas Detected Oxygen, Measurement Range 0 to 30 Percent vol, Compatible Detector Model/Series PM400-IR, PM400-IR2G, PM400-P, PM400-P2G, Compatible Detector Grainger Part Number 54XL76, 54XL77, 68KA07, 68KA08, Sensor Type Electrochemical, For Detector Type Portable, T90 Response Time 10 sec, Compatible Detector Manufacturer Part Number PM400-IR, PM400-IR2G, PM400-P, PM400-P2G, Sensor Life 2 yr, Series PM400 Series, Sub-Brand AimSafety.

-28, Right Hand, 0.

Gas Detector Sensor, Gas Detected Oxygen, Measurement Range 0 to 30 Percent vol, Compatible Detector Model/Series PM400-IR, PM400-IR2G, PM400-P, PM400-P2G, Compatible Detector Grainger Part Number 54XL76, 54XL77, 68KA07, 68KA08, Sensor Type Electrochemical, For Detector Type Portable, T90 Response Time 10 sec, Compatible Detector Manufacturer Part Number PM400-IR, PM400-IR2G, PM400-P, PM400-P2G, Sensor Life 2 yr, Series PM400 Series, Sub-Brand AimSafety.

-28, Right Hand, 0.Threaded Shank Drill Bit, Drill Bit Size 5/32 in, 135 Degrees Drill Bit Point Angle, Material - Machining High Speed Steel, Finish - Machining Black Oxide, Standards NAS 965 Type B, 1/4 In.