Thread Forming Tap, 5/16-18, Modified Bottoming, TiCN, 0 Flutes

Shelf Bin, Color Green, Includes Dividers No, Includes Label Holder Yes, Material Plastic, Overall Height 4 in, Overall Length 11 5/8 in, Overall Width 8 3/8 in, Weight Capacity 15 lb, Mobility Stationary, Nestable Yes, Number of Divider Slots 7, Number of Long Divider Slots 0, Number of Short Divider Slots 7, Number of Dividers 0, Caster Wheel Diameter Not Applicable, Divider Adjustment Increments Not Applicable, Electrostatic Discharge No, Hangable Yes, Hopper Height 4 in.

Tubing, Application Air, Chemical, Fluid Transfer, Pneumatic, Color Black, Hardness Shore D 45, Inside Diameter 1/2 in, Jacket Color No Jacket, Jacket Material N, Material Polyethylene, Material Trade Name Not Applicable, Maximum Operating Pressure 70 psi @ 70 Degrees F, Maximum Operating Temperature 150 Degrees F, Outside Diameter 5/8 in, Overall Length 100 ft, Resistance Properties Crack Resistant, Reinforcement Not Reinforced, Standards ASTM D-1248, ASTM D-1693, Wall Thickness 0.062 in.

Tubing, Application Air, Water, Color Beige, Food Application Beverage, Hardness Shore a 90 to 95, Inside Diameter 3/32 in, Jacket Color No Jacket, Jacket Material N, Material Polyurethane, Material Trade Name Not Applicable, Maximum Operating Pressure 170 psi @ 180 Degrees F, Maximum Operating Temperature 180 Degrees F, Outside Diameter 5/32 in, Overall Length 100 ft, Resistance Properties Abrasion Resistant, Kink Resistant, Tear Resistant, Wear Resistant, Reinforcement Not Reinforced.

Screw Machine Drill Bit, Drill Bit Size 3/32 in, Drill Bit Point Angle 118 Degrees , Carbide, Bright (Uncoated), Decimal Equivalent 0.0938, Fractional Inch, Drill Bit Point Type 4 Facet Point, Non-Coolant Through.

, Carbide, WXS, Non-Coolant Through.Ball End Mill, 0.5 mm Milling Dia.

, Carbide, Bright (Uncoated), Non-Coolant Through.

00 mm, Drill Bit Point Angle 140 Degrees , R Thinning Point, Carbide, TiAlN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.0787.Screw Machine Drill Bit, Drill Bit Size 2.

Screw Thread Insert STI Tap, Thread Size 5/16 In.-18, UNC, Overall Length 3 15/16 in, Cobalt, TiCN, Right Hand, Thread Length 35/64 in, Tap Chamfer Modified Bottoming, Semi-Bottoming, Thread Limit H4, Class of Fit 3B, Number of Flutes 0.

Screw Machine Drill Bit, Drill Bit Size 2.

Screw Thread Insert STI Tap, Thread Size 5/16 In.