Diamond Turning Insert, Diamond, 5/32 In, CDHH, 80 Degrees, 1/64 In, Carbide

45 Degrees Elbow, PVC, Schedule 40, For Pipe Schedule 40, 1 1/2 in, Female, Socket, 2 3/16 in, 1 1/2 in, Female, Socket, 2 3/16 in, Includes Seal No, For Pipe Outside Diameter 1 7/8 in, 2 1/4 in Overall Length, Gravity Flow Maximum Operating Pressure, -20 Degrees to 140 Degrees F.

Tubing, Application Potable Water, Cleaned and Capped No, Coating Color Not Applicable, Copper Tube Size 3/8 in, Copper Tube Type L, Fabrication Seamless, Inside Diameter 0.375 in, Material Copper, Material Grade C12200, Maximum Operating Pressure 623 psi @ 200 Degrees F, Maximum Operating Temperature 400 Degrees F, Outside Diameter 1/2 in, Overall Length 2 ft, Standards ASTM B88, NSF 372, NSF/ANSI/CAN 61, UNS C12200, Temper Hard, Tube Form Straight, Wall Thickness 0.035 in.

527 in, Material Copper, Material Grade C12200, Maximum Operating Pressure 713 psi @ 200 Degrees F, Maximum Operating Temperature 400 Degrees F, Outside Diameter 5/8 in, Overall Length 60 ft, Standards ASTM B88, NSF 372, NSF/ANSI/CAN 61, UNS C12200, Temper Soft, Tube Form Coil, Wall Thickness 0.Tubing, Application Potable Water, Cleaned and Capped No, Coating Color Blue, Copper Tube Size 1/2 in, Copper Tube Type K, Fabrication Seamless, Inside Diameter 0.

-20, Overall Length 3 ft, Tensile Strength 150,000 psi, System of Measurement Inch, Thread Direction Right Hand, End Type Straight Cut, Dimensional Standards SAE J429, Includes Nuts No, Nut Height Not Applicable, Nut Width Not Applicable, Color Black, Number of Nuts Included 0, Rockwell Hardness HRC33, HRC34, HRC35, HRC36, HRC37, HRC38, HRC39.Fully Threaded Stud, Material Grade/Class Grade 8, Material Steel, Finish Black Oxide, Thread Size 1/4 In.

Air Gun Extension, Material Brass, Compatible with Manufacturer Part Number 74BH, For Use With Blind Hole Safety Air Gun, Overall Length 7 1/2 in.

Sorbents, 18 gal.

95 mm, Thread Limit H3.

Diamond Turning Insert, Inscribed Circle 5/32 in, TiN, ANSI Code CDHH12061R, Clearance Angle 15 Degrees.

95 mm, Thread Limit H3.Thread Forming Tap, Thread Size #2-56, UNC, Overall Length 1 3/4 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 7/16 in, 75 Percent Thread Drill Size 1.

Diamond Turning Insert, Inscribed Circle 5/32 in, TiN, ANSI Code CDHH12061R, Clearance Angle 15 Degrees.