Carbide burs with MICRO cut are designed for finishing and are used in areas in which abrasive mounted points are usually used. They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces. They operate with low vibration and little noise. Almost all materials up to a hardness of 940 HV (68 HRC) can be machined. They maintain their geometry over the entire service life, and are well suited to manual and machine applications.
Deburring Abrasives & Tools,Carbide Burs
Carbide Bur - Ball Shape, MICRO Cut - 3/8 X 5/16 X 1/4 Shank - SD-3
Specifications of Carbide Bur - Ball Shape, MICRO Cut - 3/8 X 5/16 X 1/4 Shank - SD-3 | |
---|---|
Category | |
Instock | instock |