tools-and-supplies.champsview.com

ALWAYS ^{Be Happy}

Categories

Play Games ^New

HVACR and Appliance Controls,Steam Traps

ARMSTRONG INTERNATIONAL

Steam Trap,30 Psi,450F,5 In. L

About The 450 Degrees F, Type Inverted Bucket, Body Material Cast Iron, Pipe Configuration Horizontal, Trap Position Horizontal, Application Steam.Steam Trap, (F)NPT Connections 3/4 in, Max. Operating PSI 30 psi, End to End Length 5 in, Condensate Capacity Lbs/Hr 1,000 lb/hr, Max

Steam Trap, (F)NPT Connections 3/4 in, Max. Temp. 450 Degrees F, Type Inverted Bucket, Body Material Cast Iron, Pipe Configuration Horizontal, Trap Position Horizontal, Application Steam Operating PSI 30 psi, End to End Length 5 in, Condensate Capacity Lbs/Hr 1,000 lb/hr, Max.

HVACR and Appliance Controls,Steam Traps

Steam Trap,30 Psi,450F,5 In. L

Shaft Seal, 1-3/4 x 2-3/8 x 5/16, CRWA1, NBR

Square End Mill, 7/8 in Milling Dia., High Speed Steel, Bright (Uncoated), Weldon Flat, Length of Cut 1 9/16 in, Overall Length 5 1/2 in, Shank Dia.

More from 450 Degrees F, Type Inverted Bucket, Body Material Cast Iron, Pipe Configuration Horizontal, Trap Position Horizontal, Application Steam: ARMSTRONG INTERNATIONAL

HVACR and Appliance Controls,Steam Traps

Specifications of Steam Trap,30 Psi,450F,5 In. L
Category
Instock	instock

Last Updated June 16th, 2024 10:25 am

Steam Trap,30 Psi,450F,5 In. L

Rating :- 8.17 /10

Votes :- 29

Point SV575 H-Coated Premium Cobalt SV

Point SV575 H-Coated Premium Cobalt SV Point, High Speed Steel, PVD, 3, 6.4 mm, Measurement System Metric, ANSI Code SV575460.

Cutting Tools,Drill Bits,Spade Blades and Indexable Drill Inserts

Square End Mill, 1/16 in Milling Dia., Carbide, TiN, Straight, Length of Cut 1/8 in, Overall Length 1 1/2 in, Shank Dia.

Carbide End Mill,Sq,1/16,1/8 Cut L 1/8 in, Neck Dia. Not Applicable.

Cutting Tools,End Mills,Carbide 4-Flute End Mills

Point SV575 H-Coated Premium Cobalt SV

1 mm, Measurement System Metric, ANSI Code SV575900.Point SV575 H-Coated Premium Cobalt SV Point, High Speed Steel, PVD, 7, 11.

Cutting Tools,Drill Bits,Spade Blades and Indexable Drill Inserts

Square End Mill, 1/2 in Milling Dia., High Speed Steel, Bright (Uncoated), Weldon Flat, Length of Cut 3 in, Overall Length 5 in, Shank Dia.

Square End Mill,Single End,1/2",HSS 1/2 in.

Cutting Tools,End Mills,Square 2-Flute End Mills

Square End Mill, 1/2 in Milling Dia., High Speed Steel, Bright (Uncoated), Weldon Flat, Length of Cut 3 in, Overall Length 5 in, Shank Dia.

Square End Mill,Single End,1/2",HSS 1/2 in.

Cutting Tools,End Mills,Square 2-Flute End Mills