GN834-46-1/4X20-E-MT Wing Nut Stainless

625-AN Socket Head Cap Screw This allows full clamping of the flat faced ball at all times. Socket head cap screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees. The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces. GN606-1/4X20-.

.GN968-10-M6-20-B T-Nut Assembly Each set includes one Serrated Quarter Turn T-Nut and one screw.

JW Winco GN 516-HG-27 Cam Latch This cam latch housing is designed for common applications such as making a tight and vibration-proof interlock in the end position (clamping position) in connection with an elastic sealing..

. The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces. Socket head cap screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees.GN 606 socket head cap screws with full ball point (type A) are used in applications where a ball point contact is required.

.DIN6332-M6-40-SK Grub Screw Hardened The tip diameter of these grub screws is smaller than the diameter of the threaded stud, allowing them to be screwed into position from the tip side.

.DIN 6331 hexagon nuts are used for applications where frequent tightening and untightening is required.

.4 phenolic plastic knobs with steel threaded stud extend the range of clamping applications.GN 6336.

.The ridges on the wings of GN 834 wing nuts permit a better grip.

.GN 6336.4 phenolic plastic knobs with steel threaded stud extend the range of clamping applications.

.