Radial Ball Bearing,Shielded,30mm Bore

About The 008 mm, Dynamic Radial Load Capacity 20.Radial Ball Bearing, Bearing Industry Number 6206, Bore Diameter 30 mm, Closure Double Shielded, Outer Ring Width 16 mm, Outside Diameter 62 mm, Ring Material Alloy Steel, System of Measurement Metric, Cage Material Steel, ABEC Rating 1, Ball Material Alloy Steel, Bore Diameter Tolerance +0/-0.3 kN, Fillet Radius 1 mm, Includes Retaining Ring Yes, Lubricant Material MT47 Grease

Radial Ball Bearing, Bearing Industry Number 6206, Bore Diameter 30 mm, Closure Double Shielded, Outer Ring Width 16 mm, Outside Diameter 62 mm, Ring Material Alloy Steel, System of Measurement Metric, Cage Material Steel, ABEC Rating 1, Ball Material Alloy Steel, Bore Diameter Tolerance +0/-0.008 mm, Dynamic Radial Load Capacity 20.3 kN, Fillet Radius 1 mm, Includes Retaining Ring Yes, Lubricant Material MT47 Grease

Bearings,V-belts & Power Transmission Equipment,Ball Bearings,Radial Ball Bearings

V-Belt,Cogged,AX26

Speed Reducer,C-Face,56C/140TC,15:1

Bearings,V-belts & Power Transmission Equipment,Ball Bearings,Radial Ball Bearings

Specifications of Radial Ball Bearing,Shielded,30mm Bore
Category
Instock	instock

Last Updated May 19th, 2024 02:56 am

More Varieties

Rating :- 8.03 /10

Votes :- 32

9 Paint Roller Cover, 1/2 Nap, Knit Fabric

Paint Roller Cover, Cover Type Standard, Surface Texture Semi-Rough, Compatible Roller Frame Style Cage, 9 in Overall Length, 1/2 in Nap Size, Surface Material Brick, Concrete, Drywall, Masonry, Wood, Paint Type Flat Paints, Satin Paints, Stains, Waterproofing, Core Diameter 1 1/2 in, Cover Material Knit Fabric, Core Material Polypropylene, For Use With BR549-11, R017-9, R030-9, R402-11, R404-11, R405-13, R501-9, Sheen Type Low Sheen.

Paint Brushes,Rollers and Trays,Paint Rollers and Frames,Paint Roller Covers

WOOSTER

Square End Mill, 21/64 in Milling Dia., High Speed Steel, Bright (Uncoated), Weldon Flat, Length of Cut 3/4 in, Overall Length 3 1/2 in, Shank Dia.

Cobalt End Mill,Sq End,21/64,3/4 Cut L 3/8 in, Neck Dia. Not Applicable.

Cutting Tools,End Mills,General Purpose Cobalt End Mills

YG-1 TOOL CO

Point Stub Screw Machine Drill,1x2-11/16

High Speed Steel Drill.

Cutting Tools,Drill Bits,Screw Machine Length Drill Bits

YG-1 TOOL CO

Square End Mill, 1 3/4 in Milling Dia., High Speed Steel, Bright (Uncoated), Weldon Flat, Length of Cut 3 in, Overall Length 5 1/2 in, Shank Dia.

Cobalt End Mill,Sq End,1-3/4,3 Cut L 1 1/4 in, Neck Dia. Not Applicable.

Cutting Tools,End Mills,General Purpose Cobalt End Mills

YG-1 TOOL CO

Point SV170 Hardslick Coated SuperCobalt

Point SV170 Hardslick Coated Super Cobalt SV Point, High Speed Steel, PVD, 4, 7.9 mm, Measurement System Metric, ANSI Code SV170510.

Cutting Tools,Drill Bits,Solid Spade Drill Bits

YG-1 TOOL CO

Speed Reducer,C-Face,56C/140TC,15:1

13 in, Gear Ratio 15:1, Rotation CW/CCW, Maximum Input Horsepower 1.75 in, Base to Center 2.5 hp, Maximum Output Torque 749 in-lb, Overhung Load Capacity 650 ft-lb, Mounting Orientation Any Angle, Housing Material Cast Iron, Housing Material Finish Epoxy Coating System.

Bearings,V-belts & Power Transmission Equipment,Gear Drives & Speed Reducers,Speed Reducers

WINSMITH