24 In. X 9/16 In. Spiral Non-Tilt Balance, Red Tip
About The long and 9/16 in. Often it is used on wood windows, but may be found on others as well. The bow tie engages a balance foot that has been installed on the bottom edge of the window (vent) with a dual hook protruding out from the corner for the bow tie to engage
The bow tie engages a balance foot that has been installed on the bottom edge of the window (vent) with a dual hook protruding out from the corner for the bow tie to engage. This balance is 24 in. Often it is used on wood windows, but may be found on others as well. in diameter. It is charged or wound up using the Prime-Line part H 3788 Tensioning Tool.Constructed of metal tubing, a nylon bushing and steel tensioning springTubing comes in an unfinished, corrosion resistant, milled finishDesigned for use with vertical sliding, single hung and double hung windows that are equipped with spiral balances like theseFeatures a non-tilt style construction and fittingsEasy to install with only a few simple toolsFor further dimensional and specification information, please see the line drawingPrime-Line part H-3788 non-tilt balance tension tool can be ordered separatelyFor further dimensional information, please see the line drawing This is a non-tilt style spiral balance with a red bushing at its tip. It has a bow tie shaped device installed in the end of the spiral rod. long and 9/16 in.
Window Hardware,Window Balances
24 In. X 9/16 In. Spiral Non-Tilt Balance, Red Tip
Window Hardware,Window Balances
Specifications of 24 In. X 9/16 In. Spiral Non-Tilt Balance, Red Tip | |
|---|---|
| Category | |
| Instock | instock |
