reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Motors,Motor Supplies,Shaft Seals & Adapters
CR-SKF

Type CRW1 Small Bore Radial Shaft Seal, 2-3/8 In ID X 3.256 In OD, 0.453 In W, Polyacrylate Lip

About The CR Seals

CR Seals

Motors,Motor Supplies,Shaft Seals & Adapters

Type CRW1 Small Bore Radial Shaft Seal, 2-3/8 In ID X 3.256 In OD, 0.453 In W, Polyacrylate Lip

Motors,Motor Supplies,Shaft Seals & Adapters

Specifications of Type CRW1 Small Bore Radial Shaft Seal, 2-3/8 In ID X 3.256 In OD, 0.453 In W, Polyacrylate Lip

Category
Instockinstock

Last Updated

Type CRW1 Small Bore Radial Shaft Seal, 2-3/8 In ID X 3.256 In OD, 0.453 In W, Polyacrylate Lip
More Varieties

Rating :- 9.54 /10
Votes :- 31
Up to dia 1.9 with 4 facets- from dia 2 with relieved cone.

Up to dia 1.9 with 4 facets- from dia 2 with relieved cone.

Standard: DIN 6537 K Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 51. Note: Flute length LC = L2 + 1. Pro Steel Solid Carbide Drill, 18.3 mm Overall length L: 131 mm Shank dia Ds: 20 mm Feed f in steel Straight major cutting edges and a special flute profile ensure a good chip evacuation.

  • Cutting Tools,Drill Bits,Carbide-Tipped Drill Bits
  • HOLEX
    • Up to 3.7 mm dia with 2 internal cooling channels.

    Up to 3.7 mm dia with 2 internal cooling channels.

    06 mm/rev.Standard: Manufacturer's standard Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 48..

  • Cutting Tools,Drill Bits,Carbide-Tipped Drill Bits
  • GARANT
    • CNMG 120404 HB7120-1 Grade: HB7120-1 Chip breaker: VS Cutting depth ap: 0.3 - 2.5 mm Feed f: 0.15 - 0.5 mm/rev.

    CNMG 120404 HB7120-1 Grade: HB7120-1 Chip breaker: VS Cutting depth ap: 0.3 - 2.5 mm Feed f: 0.15 - 0.5 mm/rev.

    Carbide Turning Insert, CNMG431/CNMG120404 Cutting speed vc main application: 90 - 290 m/min.

  • Cutting Tools,Indexable Tools,Turning Inserts
  • GARANT
    • Up to 3.7 mm dia with 2 internal cooling channels.

    Up to 3.7 mm dia with 2 internal cooling channels.

    8 mm. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers.

  • Cutting Tools,Drill Bits,Carbide-Tipped Drill Bits
  • GARANT
    • Up to 3.7 mm dia with 2 internal cooling channels.

    Up to 3.7 mm dia with 2 internal cooling channels.

    Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials..8 mm.Standard: DIN 6537 Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 29.

  • Cutting Tools,Drill Bits,Carbide-Tipped Drill Bits
  • GARANT