Gearbelt Type 2 Synchronous Timing Pulley With Flange, 1/4 To 3/8 In Bore, 0.999 In OD, 16 Grooves

Standard: DIN 6537 K Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 51. Note: Flute length LC = L2 + 1. Pro Steel Solid Carbide Drill, 18.3 mm Overall length L: 131 mm Shank dia Ds: 20 mm Feed f in steel Straight major cutting edges and a special flute profile ensure a good chip evacuation.

06 mm/rev.Standard: Manufacturer's standard Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 48..

Carbide Turning Insert, CNMG431/CNMG120404 Cutting speed vc main application: 90 - 290 m/min.

8 mm. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers.

. HSS-E NC reamer, 8. Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.Application for type of drilling: for through holes Tolerance: H7 Number of cutting edges Z: 6 Tolerance: H7 Flute length Lc: 33 mm Overhang L1: 80 mm Overall length L: 117 mm Number of cutting edges Z: 6 Shank dia Ds: 8 mm Version suitable for NC similar to DIN 212 with straight shank dia for standard chucking especially in hydraulic chucks or high precision collet chucks.

CR Seals.

019 in Dia Pitch, 9/16 in W Face., 1.

THRIFCO PLUMBING 6861005 1/2 Inch x End Plug Smart-Loc.

, 1.019 in Dia Pitch, 9/16 in W Face.

THRIFCO PLUMBING 6861005 1/2 Inch x End Plug Smart-Loc.