Bearing,Bore 120mm,Industry 6024-2RS1/C3

Point SV520 Hardslick Coated Premium Cobalt SV Point, High Speed Steel, PVD, 0, 0.125 in, Measurement System Fractional Inch, ANSI Code SV520043.

Point SV820 Hardslick Coated Carbide SV Point, Carbide, PVD, 2, 4.8 mm, Measurement System Fractional Inch, ANSI Code SV820118.

Square End Mill,Single End,1",Carbide 1 in.

25 in, Primary Material Applicationn Cast Iron, Steel, Compatible Tool Type Angle Grinder, Series SG, Wheel Type Type 27, Maximum Operating Speed 13,300 RPM, Grade Extra Coarse.Depressed Center Grinding Wheel, Abrasive Material Aluminum Oxide, Connector Size 7/8 in, Connector Type Unthreaded Hole, Grit 24, Overall Diameter 4 1/2 in, Overall Thickness 0.

Spring Holder, Connection Type/Size 2 3/4 in Corrugated Tubing, Compatible Nominal Size 2 3/4 in, Corrugated Tubing Fitting Material Polyamide 6, Fitting Length 3.31 in, Nominal Size 2 3/4 in, Tubing Size 2.

Speed Reducer, Input Connection Type C-Face, Gear Type Worm, Output Shaft Type Hollow, Maximum Output Speed 58 RPM, Motor Frame Designation 56C/140TC, Worm Center Distance 3 in, Base to Center 3.

097 mm, Maximum Speed 7,500 RPM, Maximum Temperature 205 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outer Ring Inside Diameter 95 mm, Outside Diameter 110 mm, Overall Width 22 mm, Ring Material Alloy Steel, Roller Material Steel, Seal Type Not Applicable, Split Bearing Yes.

Radial Ball Bearing, Bearing Industry Number 6024, Bore Diameter 120 mm, Closure Double Sealed, Outer Ring Width 28 mm, Outside Diameter 180 mm, Ring Material Alloy Steel, Seal Type Contact, System of Measurement Metric, Cage Material Steel, ABEC Rating 1, Ball Material Alloy Steel, Bore Diameter Tolerance +0/-0.020 mm, Dynamic Radial Load Capacity 19,900 lbf, Includes Retaining Ring No, Lubricant Material MT33 Grease.

097 mm, Maximum Speed 7,500 RPM, Maximum Temperature 205 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outer Ring Inside Diameter 95 mm, Outside Diameter 110 mm, Overall Width 22 mm, Ring Material Alloy Steel, Roller Material Steel, Seal Type Not Applicable, Split Bearing Yes.

020 mm, Dynamic Radial Load Capacity 19,900 lbf, Includes Retaining Ring No, Lubricant Material MT33 Grease.Radial Ball Bearing, Bearing Industry Number 6024, Bore Diameter 120 mm, Closure Double Sealed, Outer Ring Width 28 mm, Outside Diameter 180 mm, Ring Material Alloy Steel, Seal Type Contact, System of Measurement Metric, Cage Material Steel, ABEC Rating 1, Ball Material Alloy Steel, Bore Diameter Tolerance +0/-0.