reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Screws & Bolts,Machine Screws
PRIME-LINE

Machine Screw, Pan Head, Phillip Drive 1/4in-20 X 2in 18-8 Stainless Steel 10PK

About The 6.Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts.1

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. Size: 1/4 inch-20 X 2 inchPan Head, Phillips DriveUse with nuts or pre-threaded holes of the same diameter & thread sizeOften used in machinery & appliancesNuts and washers not includedThread Type: Coarse, Thread Class: UNC-2A, Point Style: BluntSpecification(s) Met: ASME B18.6.3 & ASME B1.1

Screws & Bolts,Machine Screws

Machine Screw, Pan Head, Phillip Drive 1/4in-20 X 2in 18-8 Stainless Steel 10PK

Screws & Bolts,Machine Screws

Specifications of Machine Screw, Pan Head, Phillip Drive 1/4in-20 X 2in 18-8 Stainless Steel 10PK

Category
Instockinstock

Last Updated

Machine Screw, Pan Head, Phillip Drive 1/4in-20 X 2in 18-8 Stainless Steel 10PK
More Varieties

Machine Screw, Pan Head, Phillip Drive 1/4in-20 X 2in 18-8 Stainless Steel 10PK
Rating :- 9.63 /10
Votes :- 27
Coated with nitrile sandy finish to provide excellent grip in wet and rugged conditions.

Coated with nitrile sandy finish to provide excellent grip in wet and rugged conditions.

. Elastic cuff to help prevent dirt and debris from entering glove. ANSI cut glove is 13 gauge made from HPPE and spandex. A7A-120 Republic ANSI Cut Level A7 HPPE Gloves, Nitrile Coated, MD, PR A7 cut level.

  • Personal Protective Equipment (PPE),Gloves & Hand Protection,Cut-Resistant Gloves
  • ERB SAFETY
    • Medina Curved Desk Extension,Gray,47 In.

    Medina Curved Desk Extension,Gray,47 In.

    D.Curved Desk, 28" D, 47" W, 29-1/2" H, Gray Steel Laminate Wx28 In.

  • Office & School Furniture,Desks
  • MAYLINE
    • Socket head cap screws have cup points that produce a thin edge that digs into hard surfaces for a secure hold.
  • Screws & Bolts,Socket Head Cap Screws
  • PRIME-LINE
    • T-nuts or tee nuts allow for a fast and easy way to create a threaded hole in wood.

    T-nuts or tee nuts allow for a fast and easy way to create a threaded hole in wood.

    25, Steel, Zinc Plated, 11 mm Barrel Ht, 10 PK The prongs or teeth dig into the material to prevent the nut from rotating in the hole.T-Nut, 4 Prongs, M8-1.Size: M8-1.25Use to create a threaded hole in wood, composite or particle boardTeeth on the head prevent the nut from turning while the fastener is being screwed inNut flange ends up being flush with the materialHole is predrilled into board slightly larger diameter than the T-nutThread Type: Coarse, Thread Class: 6H.

  • Nuts,T-Nuts
  • PRIME-LINE
    • Dome type floor stops like these are used by many and are easy to install.This bumper is used to stop swinging doors from damaging adjacent walls and furnishings1-11/16 in.

    Dome type floor stops like these are used by many and are easy to install.This bumper is used to stop swinging doors from damaging adjacent walls and furnishings1-11/16 in.

    outside diameter x 1-5/16 in. These floor stops are designed to stop low swinging doors from damaging adjacent walls and furnishings, and they include the necessary installation fasteners.These dome type floor stops are constructed of cast brass and a rubber bumper, and they come in a satin nickel finish.

  • Door Hardware & Components,Door Accessories,Door Stops & Holders
  • SENTRY
    • Note that lag screws do not accept nuts as they are technically thick heavy duty wood screws with threads designed to cut into wood.

    Note that lag screws do not accept nuts as they are technically thick heavy duty wood screws with threads designed to cut into wood.

    1 & ASTM A307A.2.)Requires pilot hole to be drilled and installs using wrench or socket toolThread Type: Deep, Point Style: GimletSpecification(s) Met: ASME B18.

  • Screws & Bolts,Lag Screws
  • PRIME-LINE
    • Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts.

    Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts.

    Size: 1/4 inch-20 X 2 inchPan Head, Phillips DriveUse with nuts or pre-threaded holes of the same diameter & thread sizeOften used in machinery & appliancesNuts and washers not includedThread Type: Coarse, Thread Class: UNC-2A, Point Style: BluntSpecification(s) Met: ASME B18.3 & ASME B1.

  • Screws & Bolts,Machine Screws
  • PRIME-LINE
    • Stainless Steel Welding Wire,0.045x10lb

    Stainless Steel Welding Wire,0.045x10lb

    045X10Lb.Stainless Steel Welding Wire,0.

  • Filler Metals,MIG Welding Wire
  • BLUE DEMON
    • Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts.

    Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts.

    6.1. Size: 1/4 inch-20 X 2 inchPan Head, Phillips DriveUse with nuts or pre-threaded holes of the same diameter & thread sizeOften used in machinery & appliancesNuts and washers not includedThread Type: Coarse, Thread Class: UNC-2A, Point Style: BluntSpecification(s) Met: ASME B18.

  • Screws & Bolts,Machine Screws
  • PRIME-LINE
    • Stainless Steel Welding Wire,0.045x10lb

    Stainless Steel Welding Wire,0.045x10lb

    Stainless Steel Welding Wire,0.045X10Lb.

  • Filler Metals,MIG Welding Wire
  • BLUE DEMON