Gear Micrometer,200-225/.01mm

02 Percent, Temperature Range -290 Degrees to 500 Degrees F, Plastic Density 0.25 in, Off-White, Plastic Clarity Opaque, Tensile Strength 2,500 psi, Impact Strength 2.5 ft-lb/in, Friction Coefficient 0.08, Water Absorption 0.

O-Ring, Yes Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 5/16 in, Nominal Width 1/16 in, Actual Inside Dia.

3, Pack Size Small, Minimum Thread Length Not Applicable, Type Standard Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width Not Applicable.097 in, Drive Size #2, Tensile Strength 70,000 psi, Dimensional Standards ASME B18.27 in, Head Height 0.Phillips Drive Pan Head Screws,SS,PK50, Head Type Pan, Material 316 Stainless Steel, Finish Plain, Drive Phillips, Thread Size #6-32, Fastener Length 3/16 in, Head Width 0.

O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia..56 mm, Temp. 44 mm, Nominal Width 6 mm, Actual Inside Dia.

Buna-N O-Ring, 6mm Wide 44mm ID, PK5 Range -40 Degrees to 250 Degrees F, FDA Approved No, Properties Resistant to Oils, Resistant to Water, Application Standard 44 mm, Actual Width 6 mm, Color Black, Durometer 70 Shore A, Nominal Outside Dia. O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia..