Current Switch, Cur Sw,Spl,Adj,NO

Turnbuckles are used in a variety of applications and allow for easy adjustment of tension on cable, rope or chain. Turnbuckles Eye-2-Eye 3/8in X 11-3/8in Zinc Plated Steel & Aluminum 5PK It is also important to select the proper turnbuckle for your application based on load requirements.Size: 3/8 inch X 11-3/8 inchFeatures an "eye" or loop on each endUsed to maintain and adjust tension on cable, rope or chainRotating the frame will simultaneously pull eye bolts in towards each other (Note: Pliers can be used if too difficult to turn by hand)Allows for increasing or decreasing tension without having to rotate eye boltsThread Type: Coarse, Thread Class: UNC-2A, Point Style: Blunt When increasing tension, the bolts on either end are pulled in towards each other. Because the bolt on each end has opposite threading, tension can be increased or decreased simply by rotating the center frame.

6.3 & SAE J82.

Single Loop Closed Extension Spring with 0..Constructed of durable spring steel to provide optimum retraction when stretchedAll springs come in a beautiful, corrosion resistant, nickel plated finish allowing them to be used both indoors and outDesigned for use with a variety of household and professional applicationsFeatures single loop endsEasy to install with only a few simple toolsFor further dimensional and specification information, please see the line drawing Single loop closed end extension springs like these are used for a variety of household and professional applications.

6.Size: #10 X 1-1/2 inchOval Head, Phillips DriveUsed to attach sheet metal to other thin metal, wood or other materialSharp pointed tipPilot hole should be pre-drilledThread Type: Type A, Point Style: SharpSpecification(s) Met: ASME B18.3.

Size: #4-40 X 1-1/4 inchFlat head, Phillips driveUse with nuts or pre-threaded holes of the same diameter & thread sizeOften used in machinery & appliancesNuts and washers not includedThread Type: Coarse, Thread Class: UNC-2A, Point Style: BluntSpecification(s) Met: ASME B18.

DWYER VFA-33-BV Flowmeter, 10100 CcMin Water.

Current Switch, Cur Sw,Spl,Adj,NO set point 1.

Flowmeter, range 4-40 GPH water.

5, normally open output.Current Switch, Cur Sw,Spl,Adj,NO set point 1.

.Flowmeter, range 4-40 GPH water.