Left-Handed, Aluminum, Casement Locking Handle With Offset Base

Neckerchief,Poplin,C22,Royal Blue.

Chef Coat,Mesh Back,Black,C11 L/S,5X.

Tuxedo,V-Neck,F23,Charcoal Pinstripe.

2. They are ideal for use on decks since installation can be accomplished without having access to both ends of the fastener, as opposed to standard hex bolts that require a nut on the opposite end.

X 1/2 in, Grade 18-8 Stainless clevis pins) Spreading the prongs after inserting into fastener hole secures the systemOne of the prongs is extended to make them easier to separateSpecification(s) Met: ASME B18. Cotter pins insert into holes of certain types of fastener systems to secure them into place. The bulbous end prevents the pin from bing pulled through the hole so it is important to select a pin that has a diameter measurement larger than the hole diameter in the fastener you are working with.

1 & ASTM A307A. They are ideal for use on decks since installation can be accomplished without having access to both ends of the fastener, as opposed to standard hex bolts that require a nut on the opposite end. Hex Lag Screw 1/4in X 3-1/2in A307 Grade A Hot Dip Galvanized Steel 25PK Size: 1/4 inch X 3-1/2 inchHeavy duty wood screw with 6 sided hex bolt headFeatures deep wood screw threads and does not accept a nutUsed in applications where standard wood screws cannot support the load (deck building, etc.

apart.

)Requires pilot hole to be drilled and installs using wrench or socket toolThread Type: Deep, Point Style: GimletSpecification(s) Met: ASME B18. They are ideal for use on decks since installation can be accomplished without having access to both ends of the fastener, as opposed to standard hex bolts that require a nut on the opposite end.

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). Left-Handed, Aluminum, Casement Locking Handle with Offset Base on center mounting holesDiecast construction with an aluminum finishMatching right hand casement operator is Prime-Line part H 3597Mounting hardware includedA Phillips head screwdriver is required for installationFor further dimensional information, please see the line drawing from the tip of the lock to the center of the mounting holes..

)Requires pilot hole to be drilled and installs using wrench or socket toolThread Type: Deep, Point Style: GimletSpecification(s) Met: ASME B18. Hex Lag Screw 1/2in X 10in A307 Grade A Hot Dip Galvanized Steel 10PK Size: 1/2 inch X 10 inchHeavy duty wood screw with 6 sided hex bolt headFeatures deep wood screw threads and does not accept a nutUsed in applications where standard wood screws cannot support the load (deck building, etc.Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load.1 & ASTM A307A.