Sliding Window Roller/Guides,PK4

Tuxedo,V-Neck,F23,Charcoal Pinstripe.

The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws, though a pilot hole is still required prior to installation.)Requires pilot hole to be drilled and installs using wrench or socket toolThread Type: Deep, Point Style: GimletSpecification(s) Met: ASME B18.2. They are ideal for use on decks since installation can be accomplished without having access to both ends of the fastener, as opposed to standard hex bolts that require a nut on the opposite end.

.1 Once inserted through the hole, the two prongs at the opposite end can be separated and bent outward to lock the pin.

Hex Lag Screw 1/4in X 3-1/2in A307 Grade A Hot Dip Galvanized Steel 25PK Size: 1/4 inch X 3-1/2 inchHeavy duty wood screw with 6 sided hex bolt headFeatures deep wood screw threads and does not accept a nutUsed in applications where standard wood screws cannot support the load (deck building, etc.

Left-Handed, Aluminum, Casement Locking Handle with Offset Base on center mounting holesDiecast construction with an aluminum finishMatching right hand casement operator is Prime-Line part H 3597Mounting hardware includedA Phillips head screwdriver is required for installationFor further dimensional information, please see the line drawing from the tip of the lock to the center of the mounting holes.Used by many contemporary window manufacturesThis contemporary design is similar to a Truth hardware design1-1/2 in..

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load.)Requires pilot hole to be drilled and installs using wrench or socket toolThread Type: Deep, Point Style: GimletSpecification(s) Met: ASME B18.1 & ASTM A307A.2.

Sliding Window Roller/Guides,PK4, Package Quantity 4.

Size: #10 X 5/8 inchPan Head, Phillips DriveUsed to attach sheet metal to other thin metal, wood or other materialSharp pointed tipPilot hole should be pre-drilledThread Type: Type A, Point Style: SharpSpecification(s) Met: ASME B18.

Sliding Window Roller/Guides,PK4, Package Quantity 4.

3.6.Size: #10 X 5/8 inchPan Head, Phillips DriveUsed to attach sheet metal to other thin metal, wood or other materialSharp pointed tipPilot hole should be pre-drilledThread Type: Type A, Point Style: SharpSpecification(s) Met: ASME B18.Sheet Metal Screw, Self-Tap Pan Head Phillip Drive #10 X 5/8in 18-8 Stainless Steel 25PK When attaching metal to wood, it is especially important to pre-drill a hole.