PG-7200-804-P2 PRESS SW

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out).Used by many contemporary window manufacturesThis contemporary design is similar to a Truth hardware design1-1/2 in. Left-Handed, Aluminum, Casement Locking Handle with Offset Base on center mounting holesDiecast construction with an aluminum finishMatching right hand casement operator is Prime-Line part H 3597Mounting hardware includedA Phillips head screwdriver is required for installationFor further dimensional information, please see the line drawing from the tip of the lock to the center of the mounting holes. The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 in.

)Requires pilot hole to be drilled and installs using wrench or socket toolThread Type: Deep, Point Style: GimletSpecification(s) Met: ASME B18.2.

Sliding Window Roller/Guides,PK4, Package Quantity 4.

Size: #10 X 5/8 inchPan Head, Phillips DriveUsed to attach sheet metal to other thin metal, wood or other materialSharp pointed tipPilot hole should be pre-drilledThread Type: Type A, Point Style: SharpSpecification(s) Met: ASME B18.Sheet Metal Screw, Self-Tap Pan Head Phillip Drive #10 X 5/8in 18-8 Stainless Steel 25PK When attaching metal to wood, it is especially important to pre-drill a hole.3.6.

PORTER-CABLE PXCM032-0120 Pressure Gauge; 1.5" 250 PSI, 1/4" Back Connect.

80 mm, Drill Bit Point Angle 140 Degrees , Carbide, 10xD.Extra Long Drill Bit, Drill Bit Size 11.

DWYER INSTRUMENTS PG-7200-804-P2 PG-7200-804-P2 PRESS SW.

c.

DWYER INSTRUMENTS PG-7200-804-P2 PG-7200-804-P2 PRESS SW.

2.