reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Measuring & Marking Tools,Levels,Compasses,and Plumb Bobs,Specialty Levels
J.W. WINCO

GN2279-ALS-14-K-30-A Bulls Eye Level

About The g. Type A is suggested if the spirit level is to be used as a tool, e.

GN 2279 bull's eye levels are used to check the horizontal position of jigs, machines, devices, appliances and instruments. Type A is suggested if the spirit level is to be used as a tool, e.g. at different measuring points. The spirit levels are aligned in relation to the reference surface so that the bubble is centrally located inside the marking ring when the horizontal position of the contact surface is achieved.

Measuring & Marking Tools,Levels,Compasses,and Plumb Bobs,Specialty Levels

GN2279-ALS-14-K-30-A Bulls Eye Level

Measuring & Marking Tools,Levels,Compasses,and Plumb Bobs,Specialty Levels

Specifications of GN2279-ALS-14-K-30-A Bulls Eye Level

Category
Instockinstock

Last Updated

GN2279-ALS-14-K-30-A Bulls Eye Level
More Varieties

Rating :- 8.16 /10
Votes :- 33
GN 23 leveling feet have a machined base and higher load ratings.

GN 23 leveling feet have a machined base and higher load ratings.

JW Winco GN23-80-M24-200-D0-TK Leveling Mount The unique design of the base with the convex mounting area for the concave ended stud provides not only the ability for the stud to swivel, but also does not allow liquids to build up as it will with other ball socket leveling feet..

  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO
    • DIN464-M6-12 Knurled Thumb Screw

    DIN464-M6-12 Knurled Thumb Screw

    DIN 464 knurled thumb screws are machined from solid bar..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO
    • GN 613 indexing plungers are a low cost alternative with reduced dimensions.

    GN 613 indexing plungers are a low cost alternative with reduced dimensions.

    .GN613-8-A-NI Indexing Plunger Stainless Type G and GK with threaded stem are for applications where a special knob or attachment is required, or for such cases where the spindle is linked directly to an operating mechanism.

  • Machining,Detent,Lock,Pop And Plunger Pins
  • J.W. WINCO
    • DIN 950 spoked handwheels, cast iron are supplied with handles made of steel.

    DIN 950 spoked handwheels, cast iron are supplied with handles made of steel.

    . No mounting hole in rim for handwheel without handle.DIN950-AL-160-B5/8-D Spoked Handwheel Handle shipped loose; mounting of handle is required.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Handwheels
  • J.W. WINCO
    • GN 43 leveling feet are intended for use in aggressive environments.

    GN 43 leveling feet are intended for use in aggressive environments.

    .JW Winco GN43-80-1/2X13-150-D3-S Leveling Feet The wide range of possible combinations of the base and the stud / socket versions make these leveling feet universally applicable.

  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO
    • GN 300 adjustable levers have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position.
  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • GN 2279 bull's eye levels are used to check the horizontal position of jigs, machines, devices, appliances and instruments.

    GN 2279 bull's eye levels are used to check the horizontal position of jigs, machines, devices, appliances and instruments.

    Type A is suggested if the spirit level is to be used as a tool, e. at different measuring points..

  • Measuring & Marking Tools,Levels,Compasses,and Plumb Bobs,Specialty Levels
  • J.W. WINCO
    • Slotted Spanner Lock Nut, M18-1.50, Steel, Class 5

    Slotted Spanner Lock Nut, M18-1.50, Steel, Class 5

    .On DIN 1804 slotted spanner nuts, the plane surface d3 protrudes slightly and should be used as a mating surface.

  • Nuts,Lock Nuts
  • J.W. WINCO
    • GN 2279 bull's eye levels are used to check the horizontal position of jigs, machines, devices, appliances and instruments.

    GN 2279 bull's eye levels are used to check the horizontal position of jigs, machines, devices, appliances and instruments.

    Type A is suggested if the spirit level is to be used as a tool, e. at different measuring points.

  • Measuring & Marking Tools,Levels,Compasses,and Plumb Bobs,Specialty Levels
  • J.W. WINCO
    • Slotted Spanner Lock Nut, M18-1.50, Steel, Class 5

    Slotted Spanner Lock Nut, M18-1.50, Steel, Class 5

    .On DIN 1804 slotted spanner nuts, the plane surface d3 protrudes slightly and should be used as a mating surface.

  • Nuts,Lock Nuts
  • J.W. WINCO