Plte Caster,Rgd,Nylon,6,2000 Lb.,Blk

Hard beveled edges help protect from pushed or dragged pallets, and shinysurface resists damage from turning and spinning wheels.No More Painting – Save hundreds on paint and eliminate costly down time while paint drys.High Visibility – Perfect to conveing safety instructions or traffic directions to pedestrians / industrialvehicle operators. Peel & Stickstriping is applied in rolls.

ACCORTEC LCLCDS2Y-2M-ACC LC/LC DUPLEX SINGLEMODE OS2 9/125 CABLE YELLOW- 2M.

SOLE SOURCE TECHNOLOGY ONS-SI-2G-L2-SG Ons-Si-2G-L2 Oc48 Cisco Compatible Taa.

VALCOM V-5330100 P-Tec Voice Coil Speaker.

ANSI CUT A4 18 GAUGE Seamless Gray Textreme Fiber Knit Liner Size: XL (1 Pair).

Orion 110/24-15A (360W) Isolated DC-DC converter.

,Blk 6 in, Wheel Width 2 in, Wheel/Tread Material Nylon, Wheel Core Material Nylon, Non-Marking Yes, Number of Wheels 1, Tread Shape Standard.Plte Caster,Rgd,Nylon,6",2000 lb.

3 mm are too small to laser mark, sizes 0.5 mm, and 2 mm are too small to stamp).3 mm, 1.050 inch and 1.

Plte Caster,Rgd,Nylon,6",2000 lb.,Blk 6 in, Wheel Width 2 in, Wheel/Tread Material Nylon, Wheel Core Material Nylon, Non-Marking Yes, Number of Wheels 1, Tread Shape Standard.

3 mm, 1.•High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters•Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners•20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength•Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque•Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch, 1/16 inch, 5/64 inch, 1.3 mm are too small to laser mark, sizes 0.