Separator,AC Line

Square Turning Insert.

Round Milling Insert, Inscribed Circle 0.3150 in, Rake Positive.

Diamond Turning Insert.

Diamond Turning Insert, Chip-Breaker Code U, Inscribed Circle 3/8 in, Bright (Uncoated), ANSI Code CCGT32505ERU, Clearance Angle 7 Degrees.

End Mill.

Turning Insert,Diamond,CCMT 3251PP PV7.

3 in, Tool Length 1 in, Tool Width 2 in, Features Voltage Check Function, Plugging the Power Connector Into the Line Splitter Separates the Hot/Live Conductor from the Neutral (and Ground), Provides Easy and Safe Measurements of Current without the Need to Cut Off the Plug and Separate the Conductors, For Use With Clamp Meter.AC Line Splitter, CAT Safety Rating CAT II 600V, Current Multiplier Loop X1, X10, For Voltage Range 120V AC, Maximum Current Measured 15 A, Tool Height 5.

Watts 1,875 W, Nominal Outside Dia. Extension Cord,14 AWG,125VAC,25 ft. L 0.

3 in, Tool Length 1 in, Tool Width 2 in, Features Voltage Check Function, Plugging the Power Connector Into the Line Splitter Separates the Hot/Live Conductor from the Neutral (and Ground), Provides Easy and Safe Measurements of Current without the Need to Cut Off the Plug and Separate the Conductors, For Use With Clamp Meter.AC Line Splitter, CAT Safety Rating CAT II 600V, Current Multiplier Loop X1, X10, For Voltage Range 120V AC, Maximum Current Measured 15 A, Tool Height 5.

L 0.Extension Cord, Location Outdoor, Cord Length 25 ft, Wire Size 14 AWG, Max.