Spiral Point Tap, M10-1.5, Plug, Metric, 3 Flutes, TiCN

About The Spiral Point Tap, Thread Size M10x1.00 mm, HSS-E, TiCN, Right Hand, Thread Length 18.00 mm, 75 Percent Thread Drill Size 8

Spiral Point Tap, Thread Size M10x1.5, Metric Coarse, Overall Length 74.00 mm, HSS-E, TiCN, Right Hand, Thread Length 18.00 mm, 75 Percent Thread Drill Size 8.50 mm, Thread Limit D6, Class of Fit 6H, Number of Flutes 3

Cutting Tools,Taps,Spiral Point 3-Flute Taps

Square End Mill, 3.00 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 4.50 mm, Overall Length 65.00 mm, Shank Dia.

Straight Flute Hand Tap , 3/8-24 , Taper , 4 Flutes, UNF

Cutting Tools,Taps,Spiral Point 3-Flute Taps

Specifications of Spiral Point Tap, M10-1.5, Plug, Metric, 3 Flutes, TiCN
Category
Instock	instock

Last Updated May 31st, 2024 09:19 pm

Spiral Point Tap, M10-1.5, Plug, Metric, 3 Flutes, TiCN

More Varieties

Rating :- 9.91 /10

Votes :- 28

Chucking Reamer,25mm,4 Fl,4.76mm Shank

Chucking Reamer, Carbide, Bright (Uncoated), Straight, Metric, 5.60 mm.

Cutting Tools,Reamers,Carbide Chucking Reamers

OSG

Thread Forming Tap, #8-36, Bottoming, TiN, 0 Flutes

Thread Forming Tap, Thread Size #8-36, UNF, Overall Length 2 1/8 in, Cobalt, TiN, Right Hand, Thread Length 3/8 in, 75 Percent Thread Drill Size #29, Thread Limit H5, Class of Fit 2B.

Cutting Tools,Taps,Thread Forming Taps

OSG

Thread Forming Tap, 3/8-16, Plug, TiCN, 0 Flutes

Thread Forming Tap, Thread Size 3/8 In.

Cutting Tools,Taps,Thread Forming Taps

OSG

Carbide End Mill,15.00mm dia.,30mm Cut L

, Carbide, TiAlN, Non-Coolant Through.Ball End Mill, 15 mm Milling Dia.

Cutting Tools,End Mills,Ball 2-Flute End Mills

OSG

Screw Machine Drill Bit, 19/64 in Size, 140 Degrees Point Angle, Solid Carbide, EgiAs Finish

2969.Screw Machine Drill Bit, Drill Bit Size 19/64 in, Drill Bit Point Angle 140 Degrees , X Thinning Point, Carbide, EgiAs, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.

Cutting Tools,Drill Bits,Screw Machine Length Drill Bits

OSG