reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
J.W. WINCO

M16 GN346-30 Ball Joint Thrust Pad Steel

About The . They accommodate uneven or non-parallel surfaces and clamp without twisting the clamped parts.GN 346 toggle pads are generally used for the transfer of clamping forces

GN 346 toggle pads are generally used for the transfer of clamping forces. They accommodate uneven or non-parallel surfaces and clamp without twisting the clamped parts.

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints

M16 GN346-30 Ball Joint Thrust Pad Steel

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints

Specifications of M16 GN346-30 Ball Joint Thrust Pad Steel

Category
Instockinstock

Last Updated

M16 GN346-30 Ball Joint Thrust Pad Steel
More Varieties

Rating :- 8.08 /10
Votes :- 31
JW Winco GN 42-50-1/2X13-100-A1-S Leveling Feet

JW Winco GN 42-50-1/2X13-100-A1-S Leveling Feet

GN 42 leveling feet are simple, economically priced components and can be used universally thanks to the wide range of possible combinations of the base and the stud / socket versions..

  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO
    • GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    JW Winco GN115-HG-40-SW Cam Latch The beveled edges of the latch arm create a smooth latching of the door..

  • Door Hardware & Components,Door Latches,Cam Latches
  • J.W. WINCO
    • GN 817.4 indexing plungers are similar to GN 817, but with a T-handle instead of a round head knob.
  • Workholding & Machine Tool Accessories,Spring Plungers
  • J.W. WINCO
    • Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

    Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

    .GN 605 socket set screws with full ball point (type A) are used in applications where a ball point contact is required. Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees.

  • Screws & Bolts,Set Screws
  • J.W. WINCO
    • Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

    Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

    Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees.

  • Screws & Bolts,Set Screws
  • J.W. WINCO